clean55

Both my lines run to ATMOS at the moment. So yours saying for the yellow dotted line I should run it into, the brake booster line with a t piece? and I'm a little confused as by how/where to run the green dotted line because if i run the green dotted line into the charcoal canister, is it going to be able to breathe? (i still have no ʞ©$ɟign idea what the point of a CC is let alone what it does).. thanks for the response guys need all the help i can get haha.

Hi guys, So i got a defect notice for my engine breathers venting to atmosphere, I'm running twin side drafts and i have no idea how i can get them to run legally without drilling into the inlet manifold, which I'm not doing. any help/previous solution would be awesome thanks guys! -Kim

Thanks heaps for the responses guys! So I gues when I put the car in the ge jetted chocked and tuned might as well ask for a recurve as well haha!! One more question has anyone had any experience with any carby shops in Brisbane area and recommend anything?

Hey guys recently done quad carb conversion to twin solex's.. wondering where i can run the Vacuum advance to now. help would be awesome!

thanks man just shot the dude and email.

Hey guys, just needed some advice and knowledge from the world of the wise rolla guru's.. I just finished converting my 4k to Twin solex 40's and it runs... barely... now i know they will need a tune and balance and the engine still needs to be re timed. (to 8 degrees right?)... BUT the carbs were off a 2tc 1600cc and have a 32mm choke, unsure about rest of jets but going from the solex website jetting chart they should also be running a 140 for the main jet. I'm fairly certain this is the smallest size jet you can go for solex's but really, I'm just after some advice experience and knowledge about what i should be doing once timed, balanced and tuned.. thankyou guys will follow post with anticipation.

I've recently got my hands on a set of twin solex side draughts for the old 4k and hunting someone to balance/tune them up in Brisbane/any of you feel like earning some beers :P. cheers guys! On another note has anyone else heat wrapped their extractors below twin side draughts before, and has it made a significant difference/is it worth the effort. Thanks again -Kim

want so bad :D how to order?

+Moses

Hey guys I'm wondering if anyone on here would be interested in helping out and modifying some seat rails to fit my ke70. the seat mounting points are from inside points of the holes. 13" apart left to right and 10.5" front to back.

fix GJM? and going to check all the wiring friday.

key barrel was replaced not too long ago so its not that. pre much I'm just going to check every wire in the ignition system including behind the barrel and see if i can find that its just a bad solder or crimp. hopefully can find out.

haha whoops 4k, standard carby all standard 4k setup :D and Ke70 sorry about that

Ok guys, I have a doozy for you. This started yesterday, id never had the problem previously. Turning hard, but not super hard to the right but not the left, is causing my engine to stutter and just completely cut power. I've done a few tests and it feels to me like an ignition issue, because of the insane backfire when it comes back on once the G-forces are lessened. Ive given all the coil wiring a good shake and nothing is loose, opened up the dizzy and checked everything it appeared fine, and removed all spark plug leads and then re-inserted them. Still the issue persists. Now I just want to know if anyone has come across this issue before, and anyone that can help me troubleshoot the issue. I am in Brisbane and if you think you be better off helping by having a look/drive, Id be more than happy to cruise on over and see if we could solve it. Thanks in advance guys!

sp keen to get my hand on a coupe of these keep my posted as to when they go up for sale :D

i go to everyone and been in the DS scene for a long time this is a good idea!

I'm keen to meet up somewhere jsut don't know where ahah

Hey guys just posting new meet deets. ill see you all there!

Ive been on here now for a long time and attended recent cruises and such. but ive never actually introduced myself. The names Moses, ive been doing a lot with cars for a long time built a wrx from scratch with a mate. Now ive left the world of computer cars alone and have my ke70 russell Its got a solid suspension build and brake build but still only running 4k 5 speed because of pplates and me not wanting to get defected to the death :). anyway here it is russell

ill swing the rolla by just for funs :D

I am keen as a dulux can of jelly beans :D

well ill be there ill try keep an eye out for any fellow rollaclub rides :D mines pretty hard to miss. should bring peanut just so i can see it and check it out :D. Also i go to every DS meet i just love looking at all the pretty cars, and seeing some bullshit engine work. make sure you come chat when you see me and russell.

Hey guys just wondering if anyone was goign to go to the Downshift xmas meet, ill be going... here is the flyer for informations.

there better be was so dope.. I just like thinking what all these people driving past us would've thought ahha

Ye DSLR my cannon 7D haha, gotta keep the motorbike alive. the front guards are flared A lot for a ke70 so i guess they are quite big.