February 2, 200917 yr comment_313867 Hi guys, just wondering if anyone else has or had the same problem. Issue: over a year ago i bought a 91 GTi corolla with 17" vault rims with new tyres, current size with tyres are 205/40/17. The tyres weren't that great as they were some china brand which didn't last very long, they started to crack around the rubber and lead to air escaping. I then changed 2 of the tyres (back pair) for a set of falkens, which was only about 2 weeks ago, and now on one of the tyres, it keeps getting flat. The other one is fine, so i took it back to the shop and they said that i have a leak in my rim, which they tested by putting it in a bathtub full of water and showed me the where the air bubbles were escaping from. They said that they rim was previously damaged (maybe by the previous owner) and that they'll try and put a sealer on it and that should fix the problem. Hence my luck, the problem was reoccuring. It takes about 2 to 3 days for the tyre to be flat. so i called them again and told them that the sealer didn't work, they advised me that it was my rim and that it needs repairing, which can cost about $70 to $120 depending on the damage, and i also said that how come the problem wasn't their with my old tyre? well they said that it was because the old tyre was already sealed. I'm thinking to myself, isn't that the same thing????? go figure. but anyways, i just wanted top put it out there and wanted to see what people think and if you ever had the same problem? what did you do and how did you fix it? i mean could it be the tyre being faulty?? or do i actually have a damaged rim which needs repairing???? any advice or recommendation on mag wheel repair places would be much appreciated!! :cool: thanks guys.... Report
February 2, 200917 yr comment_313870 hey, if it was me i'd try another GOOD tyre fitter, tell them that the tyre isnt sealing and go from there, if it still leaks get the rim fixed. and if not the other place was just being a$$holes as some tyre fitters are (no offence) Cheers Report
February 2, 200917 yr Author comment_313899 thanks buddy, do you know any good tyre fitters around? I'm located in sydney metro. Report
February 2, 200917 yr comment_313901 I've had tires going flat on me before from sliding around whilst they didn't have enough air in them which let dirt get into the bit that seals and they would get a slow leak.... Maybe there's a bit of dirt in around the bead where it seals onto the rim? Report
February 2, 200917 yr comment_313905 strip and fit or maybe the valve is buggered? or the rim has a hairline crack? Report
February 3, 200917 yr Author comment_314314 yea maybe its a hairline crack, because the rim has been repaired before, would anyone happen to know how much it would cost to repair something like that? Report
February 3, 200917 yr comment_314352 just get a tube put in..... :P:no2::cool: one of the dumbest ideas i ever heard, yes it seems practical, but remember myles this is no 13in rim, its 17in, and there is possibility that the mag might have a hair line fracture Edited February 3, 200917 yr by MYSTIK Report
February 5, 200917 yr comment_314862 Are they chrome? this is a common problem with chrome wheels. caused by the chrome flaking Report
February 5, 200917 yr Author comment_314870 yea their chrome, however the leak seems to be coming from the inside layer of the rim, not the outside, if you know what I mean. Report
February 6, 200917 yr comment_315543 Go to Jobsons Tyres at Artarmon... See Joe... Tell him Ben from Chatswood Toyota sent you there and he'll look after you... Report
February 28, 200917 yr comment_323472 :dance::no2::y: one of the dumbest ideas i ever heard, yes it seems practical, but remember myles this is no 13in rim, its 17in, and there is possibility that the mag might have a hair line fracture Thats what i thought. A tube for 17's would be like hens teeth to find me thinks. And with the possibility that it has a crack :) Id be shitting myself driving on it, let alone any high speed driving. Report
March 1, 200917 yr comment_323561 Thats what i thought. A tube for 17's would be like hens teeth to find me thinks. And with the possibility that it has a crack :dance: Id be shitting myself driving on it, let alone any high speed driving. plus its not pretty when a alloy/mag wheel implodes on itself because it was fractured Report
March 9, 200917 yr comment_325913 Vault wheels.... enough said. Alot of them have problems with the bead sealing due to the flaking chrome, others cop a single pot hole and buckle. Id be finding some new/nicer wheels. Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now