Removing 4age Sump

[ae174agze]

how do you remove a 4age sump?

dented and f@$ked from transporting

 

ive undone all the little 10mm bolts that hold it on its droped down about an inch or so and it feels like its grabbing onto something ? could be the baffle

 

any help please

as i'm in the middle of the job

 

cheers

[Trev]

Squeeze a spanner in and undo the oil pickup, Think it was a 10mm, might be a 12mm.

[ae174agze]

thanks trev big help

 

10mm btw

cheers

Edited February 3, 2009 by ae174agze

[Trev]

You might also get away with taking the sump away from the baffle plate, See how you go.

 

EDIT: I removed mine as it as it enables you to take the whole lot away so you can seal it back up:

 

Edited February 3, 2009 by Trev

[ae174agze]

i removed those 2 little bolts and it releaced it a little more but still wont come clean off ?

[Trev]

Sorry mate i should of said that it is 4 bolts.

 

EDIT: Even made you a pic :P

 

Edited February 3, 2009 by Trev

[ae174agze]

ok got the little sucker off

[Trev]

Have you got another sump to go on?

 

Take the windage tray/baffle plate off and clean up the surface of the block, have the oil pickup bolted on but have the windage tray/baffle plate sitting loose and place sealer on the block, and then onto the windage tray/baffle plate and quickly throw the sump on.

[ae174agze]

yeha i got an other sump to go on i just have to get it off

going to be even more hard

 

i'll keep you posted

[ae174agze]

cheers for everyones help

sorry i havent updated it earlier but i couldent be f@$ked

 

here it sits now

 

 

from what it was

[Jono]

where is your turbo oil drain?

[Ella]

umm thats a NA 4age yo

[Jono]

yes. i missed the bit in his sig about how its not all together yet.