should i try bashing the top of the sheer bolt with a hammer and punch to leave a impression in it then get it out with a screw driver?

 

or just drill the whole thing out?

Yeah use a hammer and punch...... the long way

 

Or, cut a small slot with a hack saw or dremel and undo them with a flat-head. :)

thanks for the info :)

thanks for the info :)

get a set of easy outs or stud removers drill hole in bolt head put in easy out turn with shifter. less damage to other parts

should i try bashing the top of the sheer bolt with a hammer and punch to leave a impression in it then get it out with a screw driver?

 

or just drill the whole thing out?

[/quote

 

I would use a VERY sharp nail punch and 'gently' tap the shear off bolts.

Once they are slightly loose you should be able to remove them by hand.

Once you hace them off cut a slot in the top so you can screw them back on.

Don't worry about a thief being able to unscrew them and steal your car,

there a many easier ways of doing that. :)

P.S. I have been a Locksmith for over 10 years.

If you have any other lock issues PM me.

you beauty, ill pm you if i have any dramas.

 

thanks mate