Ke35/55 Coupe Chrome Window Trims

[pozman]

hi guys, in the middle of stripping my rolla for paint, and was wondering if any one knew how to get the chome window trims off the coupes (without damaging it)

 

any help would be great thanks

 

pozman

[parrot]

Do you mean the front and rear screens, or the side windows?

 

If you are referring to the front and rear screens, see here

 

http://www.rollaclub.com/board/?showtopic=32897

 

Of course if you cut them, you will need to replace the rubbers.

Edited October 3, 2009 by parrot

[pozman]

i mean the side windows, just the chrome trim/seal on the edge

 

but thanks for that might come in handy

[greendog]

i mean the side windows, just the chrome trim/seal on the edge

 

but thanks for that might come in handy

i think the chrome part is supposed to stay on the window,i found only the rubber comes off by small screw at the bottom of seal,.i think you could pry it off but will damage it more than likely.

edit-sorry i thought u ment the chrome seal between windows

Edited October 4, 2009 by greendog

[pozman]

yeah figured it out today, there are two screws on the inside of the trim, have to pull the internal panel out to get to them, and wind the window down, then it just pulls out, the trim between the windows should just pull off