rollababe09 Posted December 19, 2009 Report Share Posted December 19, 2009 hey guys, ive been off the site for ages but back again! got a new warrant of fitness so the ke10 is legal again, wasnt for 3mths lol. it passed with flying colours - just a muffler that I knew about already & got replaced that night. anyway, they had noted down for 'next time' that i should look at replacing the Front lower arm bushes, 1 is cracked through. this is NOT a simple quick job to do & parts are a bit on the hard side to get! Ive found some random site that does 1 part # I'm after. but wanted to see if anyone else had replaced these bushes, did you get new ones, get some made up or opted to upgrade the suspension or do mods?? curious - can't find any info on this in the tech section cheers in advance guys! Quote Link to comment Share on other sites More sharing options...
camerondownunder88 Posted December 19, 2009 Report Share Posted December 19, 2009 Hi, Took me forever to find replacements for mine but I did. Pic below: Imported them from Japan NOT CHEAP....Planning to measure and custom machine some from a bar or raw stock harder Nolathane stuff. But a few other guys here have custom made. As in Australia from what I can find can't get this part :) Cheers Cameron Quote Link to comment Share on other sites More sharing options...
parrot Posted December 19, 2009 Report Share Posted December 19, 2009 (edited) Double post sorry Edited December 19, 2009 by parrot Quote Link to comment Share on other sites More sharing options...
parrot Posted December 19, 2009 Report Share Posted December 19, 2009 I've just responded to your PM rollababe. Mine are the same as Cam's, which is lucky as I unknowingly outbid him when I got mine! The aftermarket part number on the box is CR-4010 Quote Link to comment Share on other sites More sharing options...
rollababe09 Posted December 19, 2009 Author Report Share Posted December 19, 2009 I've just responded to your PM rollababe. Mine are the same as Cam's, which is lucky as I unknowingly outbid him when I got mine! The aftermarket part number on the box is CR-4010 appreciate both your replies guys - big help the long part # on the box is thew same @ as I have listed in my factory KE11 parts book. What prices did these go for if you don't mind saying? curious what they will cost on average if i can find some. Quote Link to comment Share on other sites More sharing options...
parrot Posted December 19, 2009 Report Share Posted December 19, 2009 Mine came out at roughly $AUD75 with commissions, shipping etc. Quote Link to comment Share on other sites More sharing options...
philbey Posted December 21, 2009 Report Share Posted December 21, 2009 Someone want to measure them up and sketch it for me, I'll just get a set of urethanes machined up I reckon. Quote Link to comment Share on other sites More sharing options...
parrot Posted December 21, 2009 Report Share Posted December 21, 2009 Mine are still at importmonster's warehouse, waiting for the arrival of the next container. I'll let you know when I have them unless CDU gets back to you. Quote Link to comment Share on other sites More sharing options...
philbey Posted December 21, 2009 Report Share Posted December 21, 2009 Yeh for sure. If you can get it sketched up I can track down a stock urethane unit that I can easily turn down to suit. Quote Link to comment Share on other sites More sharing options...
parrot Posted December 23, 2009 Report Share Posted December 23, 2009 Went and picked up my various goodies today. Not sure how easy it will be to get some turned up. Here is a detail shot of each end of the bush. Clearly need to use your original inner and outer shells. I'll see what I can do with some accurate measurements. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.