Rolliac Posted April 20, 2010 Report Share Posted April 20, 2010 Hay I’m trying to work out where to find new plastic bushes for the linkage shaft on a Weber manifold. I don’t know what brand the manifold is but was told it came from America. I looked through a Redline parts catalogue but couldn’t find anything. Hope I don’t have to get new ones made from scratch (machined). So does anyone know where I might be able to get these darn things? Help appreciated. Quote Link to comment Share on other sites More sharing options...
Taz_Rx Posted April 21, 2010 Report Share Posted April 21, 2010 What are they made from? Urethane? You might have to get some made from scratch. See if you can source the urethane from somewhere and them take it to a brass-ware stock and see if they can turn them out!? Quote Link to comment Share on other sites More sharing options...
camerondownunder88 Posted April 21, 2010 Report Share Posted April 21, 2010 I think the ones in my manifold are ABS not 100% sure. But I got a set for mine re-done in machine shop at work. I sourced a rod of teflon and had them machined out of that. So just pop one out and any machine shop should be able to do it out of teflon, PVC, ABS, Nylon etc any plastic you can get your hands on. Cheers Cameron Quote Link to comment Share on other sites More sharing options...
Rolliac Posted April 21, 2010 Author Report Share Posted April 21, 2010 Thanks fellas. Teflon ay. Wander where ya get that from? Should be able to find PVC or something at the hardware. Quote Link to comment Share on other sites More sharing options...
Trev Posted April 21, 2010 Report Share Posted April 21, 2010 Thought the pic looked familiar, rides thread *cough* rides thread Did you get measurements as yet as I have some 10mm ID snap bushings that might do the trick, I will get off my ass one day and come down. Quote Link to comment Share on other sites More sharing options...
Rolliac Posted April 21, 2010 Author Report Share Posted April 21, 2010 (edited) Haha Trev. I'll have to upload some more pics. Yeah sorting these carbs out is about the only thing left. I got the old bushes out. The outside diameter is 14mm and inside is probably supposed to be 9mm or something as the shaft is 10mm. A mate suggested using brass instead of plastic. Might be worth a shot. Edited April 21, 2010 by Rolliac Quote Link to comment Share on other sites More sharing options...
Trev Posted April 21, 2010 Report Share Posted April 21, 2010 It was also suggested to me when I was trying to fix it too cut the top bit off so I could drill and tap it to fit a heim joint like so: http://www.vxb.com/page/bearings/PROD/HR/Kit214 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.