August 10, 201115 yr comment_545777 Just wondering if the flywheel and clutch from a ke30 4speed would match up with a ke70 4 or 5 speed box? Because getting the ke70 box for my ke30 is tempting due to not needing to cut a new shifter hole and I've already got the flywheel and clutch attatched and can't be bothered taking them off. If it comes to it though, I'll just use the ke30 4 speed. Cheers Report
August 10, 201115 yr comment_545811 Apparently according to exedy there are 2 part numbers for clutches in the KE70... Report
August 11, 201115 yr Author comment_545864 Apparently according to exedy there are 2 part numbers for clutches in the KE70... So it could possibly work? Go the Ke70 5 speed, that's what I did. And you used the flywheel and clutch plate etc, from the ke30 gearbox? Report
August 11, 201115 yr comment_545869 Apparently according to exedy there are 2 part numbers for clutches in the KE70... ....and the bigger is for a K-T50. :wink: Long story short - Yes you can use the ke30 flywheel/clutch with a ke70 4 or 5 speed. Report
August 11, 201115 yr Author comment_545879 ....and the bigger is for a K-T50. :wink: Long story short - Yes you can use the ke30 flywheel/clutch with a ke70 4 or 5 speed. Cheers! Report
August 11, 201115 yr comment_545884 Because getting the ke70 box for my ke30 is tempting due to not needing to cut a new shifter hole I've got to question that, cause the shifter for the ke70 g'box is further back then what the ke30 shifter is. So unless the car is originally an auto you will be cutting metal to fit the g'box. Other then that, the parts you'll be needing is the g'box x-member from the ke30 (Re-drilled for the ke70 g'box mount), a pair of 1 inch spacer blocks that'll go between the x-member and the car frame and a pair of M10 x 50mm bolts Apparently according to exedy there are 2 part numbers for clutches in the KE70... After my experience with exedy i'm steering clear and leaning more to clutch industries. The CI clutch plate that i had to get to replace the exedy clutch doesn't just look stronger but its also firmer under the left foot. And it was cheaper as well. Report
August 11, 201115 yr comment_545898 There are 2 types of k series gearbox's. The common 19 spline & the rare 21 spline gearbox. Report
August 11, 201115 yr comment_545904 There are 2 types of k series gearbox's. The common 19 spline & the rare 21 spline gearbox. ....and the bigger is for a K-T50. :wink: Which is the rare 21 spline g'box Report
August 11, 201115 yr Author comment_545926 ah yeh fair enough, yeh my ke30 was originally an auto thus thinking about getting the ksev box Report
August 11, 201115 yr comment_545943 Two speed or three speed auto ? The drive shaft for the two speed auto can be used for the manual g'box Whereas you'll have to hunt up one if it came from the three speed auto. Three speed auto - aka the holden trimatic Report
August 11, 201115 yr comment_545962 After extensive research I have determined I am wrong. PBR are liars.... The 21 spline clutch must be a T series box to 180mm flywheel. Exedy part numbers 19 spline - TYK-6036 - 180 x 21.6 x 19 21 spline - TYK-6280 - 180 x 24.1 x 21 Report
August 11, 201115 yr Author comment_545980 its the 2 speed auto, or as I prefer to call it.. slow and slower. yeah I've got the drive shaft from the car and also from the manual kit i bought Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now