hey all I'm gunna be sticking a vp v6 into a ke70 and wonder if anyone knows wether there is any links i could use to find out wiring or any sites to help do this conversion and what I'm expecting and wats the best to use for handling, what diff to use and how to make tail shaft fit.it will be just a flick switch ignition and no dash as car will be a track car for fun.

look up conversions done to hiluxes, should be fairly similar and is a popular conversion for them..

http://www.ae86drivingclub.com.au/forums/showthread.php/23385

yeah ive been susing that stuff out but i want to know the best way to modify the looms i wont use much of the orginal dish and interior so i need to modify the v6 loom to just start with a push switch and shit

My mate had a KE70 with a VP 3800 in it. Went like a shower of shit. Just make sure you clearance the tunnel enough for the box.

 

Everything worked like it should. Had a full KE70 dash that worked (speedo was a bit out) and started with a key, and afternoon should see the wiring sorted out with the aid of a diagram for the commo and the KE.

 

hey all I'm gunna be sticking a vp v6 into a ke70 and wonder if anyone knows wether there is any links i could use to find out wiring or any sites to help do this conversion and what I'm expecting and wats the best to use for handling, what diff to use and how to make tail shaft fit.it will be just a flick switch ignition and no dash as car will be a track car for fun.

hey there, doing same engine swap in ke55 ,try looking at this link,http://www.rollaclub.com/board/topic/8849-nicks-ke30-v6-project/page__p__132560__fromsearch__1#entry132560

thanks guys ill sus it out