Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Rust In The Canals...

Featured Replies

  • Author

Yeah, I know about what all the salt are doing to the car:-)

 

And about the chassis, I don't exactly know what I shall do there... but I know that I'll need to puss away the rust, but is there anything more? And where should I look for rust?

  • Replies 37
  • Views 53.9k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • White is a very easy colour to work with, so you're lucky :)   Watch a few youtube videos on the subject, and give it a try.   You'll be amazed the results you can achieve with simple equipment...

  • Hi Benjamin, welcome to Rollaclub! Your English is a lot better then my Norwegian.......   The only thing I didn't understand was canals.   If the rust has gone through, your only option is to cu

  • Yes, I thought "gutters" but they don't really have them. Then maybe "channels"... door sills?   Take a photo of the rust in the canals for us Benjamin.   As parrot said, grind the paint back aro

Posted Images

The worst will b inside the channel as stuff gets trapped in there. The inner vertical face is part of the car, which will rust also. The curved outer face is the channel you buy, so that ends up brand new.

 

All you can do is clean the rust off with a wire brush in a power drill and patch any holes, then treat the metal with some rust kill product. Give it a couple of anti-rust coats of paint (no-one sees it!) and then weld on the new channel.

 

If you want it to last more than 15 years you could rustkill spray the inside afterwards to catch the weld spots where the paint gets burned off. The companies who do that drill a small hole in the back of the channel under the rear guard and spray anti-rust wax in with a long tube that sprays outwards. Then they just put a rubber grommet in the hole.

  • Author

It is those holes ur alking about, in the old channels... but I'm only going to have it one or two years after I'm turned 18, and now I'm 17, so it's not so important to do a job to make the car last for 15 years. But I will try to kill the rust inside after taking of the channels. thanks

And sand the bonnet with 800 grit wet and dry before painting :wink:

  • Author

Do I need to paint behind the channels, on the chassis? or is it just rust protection u mean?

Its just for rust protection, so a spray of body sealer would do after you treat the rust to neutralise it.

  • Author

Hi, i've got another job too. The window viper engine needs to be changed, i've got a new one. But any1 car upload a video on how to change it? Becase i know that i'll have to tale off the glove compartment, or at least googe translate said that it's named so...?

  • Author

Hi, i've got another job too. The window viper engine needs to be changed, i've got a new one. But any1 car upload a video on how to change it? Becase i know that i'll have to tale off the glove compartment, or at least googe translate said that it's named so...?

  • Author

How am I going to fix the hood? it is some marks on it, adn a bit of rust, but what is the easyest and cheapest way? And the same with the trunk, except that with the trunk there is cracks all over, they have not used hardener I think...

Either a grinder ti strip the paint in the dents and to clean the rust out of the rusty bits,

 

or paint stripper and a Linbide tungsten scraper to strip all the paint back to steel.

 

I used the stripper & scraper-

 

http://www.rollaclub...the-girls-ke70/

 

Where the car had tiny rust spiderwebs under the paint I took it back to bare steel & treated it with rustkill fluid. I filled a couple of dents in the front guard that hadn't been done very well while I was at it. The rest of the paint I sanded back and then undercoated the whole panel.

post-7544-0-52443300-1326365718_thumb.jpg

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.