Ke70 To Vx Super6

[KE70 SV6]

Will post pictures of my build as I go but as it stands I have the donor car (2001) VX supercharged v6, looking at a KE70 tomorrow fingers crossed :)

[frknstn]

Goodluck with the build mate

Mines being going for a year or two now. Still not done but getting close

Only real problem that's a pain is the extravtors are right at the steering so you need to cut and angle it and bend around it. Itherthan that its pretty straight forward

 

[KE70 SV6]

Here's a pic of the new "heart and soul" just replaced the fingered harmonic balancer will give her a clean up once I yank it out.

Edited July 7, 2013 by KE70 SV6

[orangeLJ]

I havent looked at a KE70 rack and steerign column too hard,

 

But if you are having trouble with clearance, you could always add a few steering unis to get it to "bend" around what you need.

 

Otherwise, the other trick is to offet the column (so redrill holes slightly over) and move the whole lot an inch whichever way you need to. obviously its a bit of work, but if it gives you the clearance to run of the shelf, or bigger pipes, it would be more than worth it.

[frknstn]

I thought about that with mine but I found it easier to modify the extractors. Didn't need much just added a slight S into them to space them out wider. Made sure to do both sides so their equal still.

Havnt finished them waiting till I put this ecotec in and will finish it all up

[KE70 SV6]

slight change of plan the KE70 fell through I ended up buying myself a suzuki Mightyboy

[mark1414]

slight change of plan the KE70 fell through I ended up buying myself a suzuki Mightyboy

 

[frknstn]

That's going to be one badass mightyboy

[towe001]

http://www.icbm.com.au/mightyboy/v8.htm

Last i heard it was running the streets of Alice Springs with rego.

That was decades ago but.