newjak Posted May 18, 2014 Report Share Posted May 18, 2014 hi guys, I've seen some people drill the tops of the strut tower to fit these but i was wondering has anyone drilled out the camber plate and relocated to stud to fit the KE55 spacing. i mean its easy to push out the stud in the camber plate, mark out the new position and repress in the stud. Therefore you don't need to drill the strut tower any on done this?? curious Quote Link to comment Share on other sites More sharing options...
ke70dave Posted May 18, 2014 Report Share Posted May 18, 2014 The issue is that generally you arent moving the stud far enough to get a nice clean hole in the camber plate. you can always just make a new camber plate. get 2 bits of aluminium laser cut the same but with the holes in the proper spot. Here is some photos of how close the holes are, from those photos i think its fair to say you wont get enough material in the camber plate to drill a new hole. http://www.rollaclub.com/board/topic/50551-ae86-front-end-suspension-brakes-into-ke55/ Quote Link to comment Share on other sites More sharing options...
newjak Posted May 19, 2014 Author Report Share Posted May 19, 2014 cool thanks just wanted to put it out there so what is the measurment/\spacing between the three bolts?... Quote Link to comment Share on other sites More sharing options...
ke35 dan Posted May 26, 2014 Report Share Posted May 26, 2014 u can retro fit your tops to 86 struts or just go cusco adjustable ones Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.