51RJZ Posted July 14, 2014 Report Share Posted July 14, 2014 Hey guys I've done an engine conversion that requires a longer throttle cable. Is there anything out there that might work and is longer than a standard ke30-38 cable Quote Link to comment Share on other sites More sharing options...
Taz_Rx Posted July 14, 2014 Report Share Posted July 14, 2014 You've got your throttle body on the passenger side don't you? I used one out of a v6 pajero, heaps longer and even bolted straight up to the fire wall! Quote Link to comment Share on other sites More sharing options...
51RJZ Posted July 15, 2014 Author Report Share Posted July 15, 2014 Yeah mine has a 2j in it and an after market throttle body that sits quite forward. Did it just bolt up to the standard accelerator pedal? Any chance you could give me a rough length from the firewall to the end of cable? Quote Link to comment Share on other sites More sharing options...
Taz_Rx Posted July 16, 2014 Report Share Posted July 16, 2014 It had a plug on it that clipped into the pedal, made like very easy. I did have to get the other end shortened (cable only) with a new lead on the end. Its long enough to go round behind the motor, under the fuel rail and then do a 180 to connect to the throttle body. Without doing the 180 I reckon the end of the cable could nearly touch the radiator support panel. Quote Link to comment Share on other sites More sharing options...
51RJZ Posted July 18, 2014 Author Report Share Posted July 18, 2014 Righto I'll have to check it out thanks Quote Link to comment Share on other sites More sharing options...
Clapped out Posted July 18, 2014 Report Share Posted July 18, 2014 Or you could just get a whole brand new one made up, there is a place on the northside here where I get mine done, usually cost around the $80 mark, just tell them what you want and they'll make it, cheers! Quote Link to comment Share on other sites More sharing options...
51RJZ Posted July 20, 2014 Author Report Share Posted July 20, 2014 Yeah figured I'll just buy a new one. Seems to hard playing with other crap. Just not sure who does them on the south side. Quote Link to comment Share on other sites More sharing options...
springersrolla Posted July 20, 2014 Report Share Posted July 20, 2014 http://www.atscables.com.au/ there at coopers plains. made my mates 60 series landcruiser cable to suit turbo engine in a day, under $100, i now have it and will use it for my twin carbs, if i didnt need it i would give it to you, its absolutely perfect. identical and works great. the old dude there was really helpful, see how cheap he'l do it for. couldnt recommend higher Quote Link to comment Share on other sites More sharing options...
51RJZ Posted July 21, 2014 Author Report Share Posted July 21, 2014 Righto bud thanks for that. Might just go see him. I'm not to far from there anyway. Cheers Quote Link to comment Share on other sites More sharing options...
51RJZ Posted August 1, 2014 Author Report Share Posted August 1, 2014 For anyone ever chasing a cable I got it made though ats cables as posted above. easy enough to deal with and cost $80 cash. :) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.