looking to fit some weber 45 dcoe to a silvertop. can't find any manifold for it.

they usually only sell manifolds for 16v. would the bolt pattern from a 16v manifold be the same as a silvertop 20v?

thanks. and i know its a downgrade but not much people do it so ill do it..

The 16v has differnt intake manifold mounting so no it wont bolt on. Need something custom made.

 

You are going to knowingly spend time and money downgrading your engine? Good plan!:/

You can buy fcr manifolds for them i think.

got the carbs fitted anyway. fitting an msd 6al2 non programmable for ignition. can't seem to get it triggered. I'm using the red and green wires from the distributor to feed the hall effect trigger wire for the box. no luck. help?

Email MSD, include wiring diagrams for your engine & they should be able to tell you.

will do thanks. thinking of getting a 16v dizzy to fit it. opinions??

will email them. will 16v dizzy work on the 20v engine?

solved the problem. went to the junk to pull out a 4afe dizzy. gutted it out except for the trigger wheel. cut it to fit and then its pretty much str8 bolt on. only problem is the bolt to hold the dizzy still.