Twins Or Single

[boosted_gem]

Just wondering what peoples thoughts are on running twin 40mm delortos compared to a 350 holly on a reco 4k.

 

I've got a port and polished head, 290 degree cam extractors and a 2 1/4 inch exhuast

 

Just wondering which i would get more power out of

 

Cheers nathan

 

and yes i know this might be a bit of a noob question but couldn't find anything specifically on this topic when doing a search

[Xany]

the twins for sure....

 

downdraft compared to sidedraft.....Sideys For the WIN!

[Medicine_Man]

As Xany said, Twins for the win!

 

Mine will be going on my soon hopefully!

 

They atomise the fuel a lot better too!!!!

[Redwarf]

Twins. More expensive, but SOOOOOO much better.

[mitch13]

Off topic, but Nick what does FTW mean?

[Xany]

For the win.....or FOR the WIN!!!!

[ToDa30/4]

i hope I'm not too far off topic but i was going to run a single 40 dcoe in a 4k worked head & extractors & with what I'm told is nicks old cam which i bought off a forum member & local yodas tell me its to hot & wont make power due to the overlap so nicks or anyone have an opinion should i leave this cam out till i have my sc12 setup & run a 270oish cam on the na 4k till then .cheers dave

[madrolla68]

It should work well with forced induction

 

The original owner of that cam was setting the car up for Nitrous

 

For me, with a 32/36 weber all it did was chew fuel like a bastard... Then again I never tuned it

 

Get used to people asking if you drive a rotary... I used to get asked at LEAST once a day at traffic lights.

 

2.25" exhaust system is too big... go 2" MAXIMUM

 

FWIW I think its about a 300o Cam from memory

 

Best of luck with it, with a Supercharger you should be able to make a decent power figure out of it :y:

 

Go the big camshaft man, I'm running over 300 degrees N/A with NOS and it loves it.

 

Goes pretty good without it as well with the twin 40mm dellortos.

[ToDa30/4]

cheers nick & madrolla68 , Ok its going in the 4k I'm building ,reckon it will be fun n/a or s/c :y:

[muller]

Fun for sure.

 

Smoother airflow with the sideys and for the twins, more is better :y:

[Hurricane]

yeah stuff the holley man, and were would ya get a manifold for a holley? 40mm all da way, you can get solexes of a 2tg or 18rg cheap, ive got like 4 pairs but need them all webers are better thought but cost more as i was gopin to runn some i have but to mush to rebuild.