AE92Nova

So I ended up Buying my friends Commodore for 2K with 6 months Rego. Shes a VR Body, VP wiring harness head lights to speedo drive. The plan for this girl is to be my new daily while i slowly do her up when i got the spare cash Shes has a neat interior, The Bodies Straight and the paint jobs good. VR block, Reconditioned 20K ago Current Mods: Crow cam Package (stage 3 cam, stage 3 chip, Heavy duty valve springs), Home made Twin throttle body Have some other custom goodies like Sport steering wheel, Skull Gear-nob, After market gauge's Need to Replace the steering rack, I have a spare one Laying around. She also has a busted passenger side engine mount. And is in need of 2 new Tyres.

Hey guys, I have a 4AFC I'm Working to try and get 4AGE Power out of it... So far i have Dropped a Twin Barrel Weber Carby with a RamFlo, Along with a set of extractors and a 2" cat back exhaust, 2" muffler, Free-flow Cat. Installed a Heavy Duty Cluth, Along with a new Timing Belt and a GT40 Coil.. I plan to Reco it along with adding Heavy Duty Value Springs, and a Stage 3 Cam RPM Redline is about 8-9K going to try for 11K, and Plan on keeping it a low Combustion Engine for some Boost Any thoughts or Advice is apprecated , Apart from getting a 4AGE...

MY-GIRL: Holden Nova 1990 AE92 Sedan 4A-FC... Hey guys its been a while. So i'll get on with it. I ended up losing my license for 1 yr. and had to do 100 Hours of Community Service. As well as Deregister my girl and get it back to my mums, out in the country Hours away from my place to Keep her. I've only recently got my license back... and picked my girl up. All she needed was a new battery and she came back to live on the 2nd-3rd turn, after a whole Yr under the house. Then 4 new 2nd Hand Tyres I had lying around back at home. and she passed the RWC 1st go. Then my 1st drive with her again was the few hour cruise back to Brissy. Anyway... So next week I get my Payout. I plan to give her a professional Home-Paint job, With 1 of my dads mates. Was also planing on dropping a (32/36 DGV 5A) Weber Carby in her. As well as some interior Work... So over the next few Weeks I'll get some befor N after Pics going as I do more work to her. And try to keep This Page up to date. Also had an Indian Taxi Driver run up my arse like only a few weeks after I got my license back. :sob: So far I have replaced the whole passanger side tail light. And a bit of Home panel beating, But still needs to be completed When I hit it with the paint.

my Ae92 Nova 4AFC is currently sitting at my mums, waiting to get my licene back... have set of extractors with a 2" cat back sports performance exhuast with a muffler at the back... was a Decent Incraese in power. with a nice raw added... Huge fuel efficents.

its started on my L's when i got done twice for no open driver with me, Went to good driving behaviour. than i got my P's and got pulled over at 11:20 at nite with me and 2 others in the car.... So they got me for that.... man i can not stop driving its more addictive then a Bong n a ciggy in one lol..... ALtho yes starting fresh would be awsome. pitty i never got that chance in the 1st place LOL

hey guys, well i was planing on buying/installing my weber carby this weekend, however last night i got pulled over again, this time they hit me for Unlienced driving.... so unfortunatly my plans on doing this car up will now be frozen for about 6 months. next time they pull me over. the cars gone... SO to be honest with u guys next time i hear sirens, the news will be worth whatching.. LOL (i've out ran a cop befor drifting it on back streets for my get away. i cud/will do it again)...

Quick update: replaced all 4 brake pads a few hours ago, and gave her an oil change and bleed the brakes...

lol na man its really comfortable, the reason why its 3mm is cus 3mm will still bend when u sit on it, Then go back to normal when you get out... works perfect, i would say its even better then befor the webbing was broken.

hey guys quick update. The Webing in my drivers seat was broken so a quick fix. 3 Bits of 3mm Steel,, problem solved. Cost: less then $5.

Hey guys i finally got some pics of my Nova. hope its does not look to bad with the faded paint. Lowwer Gear Knob A close up of my Extractors shitty after-market Tacho Uprades to be done in the next month or 2. Repaire of all small dints/cuts/ect. Paint Job. Weber Carby. Dash Tacho/Speedo.

haha always drive her likes its stolen,, She thrives on abuse. i know what u guys r thinking with only a 4A-FC but then again i don't think a 4A-FC is ment to hit 230

Member Name - AE92Nova Area - Alexandra hills, Brisbane Daily Drive - AE92 1990 Holden Nova. Sedan

hey guys names Mitch and live in South East Brisbane and I finally thought it was time to make a post in rollarides for my Nova. My Car: Holden Nova 1990 Sedan, AE92 (4A-FC) I brought her about 1 yr ago, in the time that i have had her i've had 1 major crash due 2 driver fatigue, hit a cutter at 110Ks. repair/new parts where front passenger side CV joint, strut, wish bone, Mags ;) . New parts for passenger side rear include controll arms x2,Mags :D , Rear crossmember. Unbelivable the Shell and Chassis where not bent at all. After the repaire was complete. she seemed to go better then befor the crash, Weird. So i continued to do a lil bit of work on her every time i got the cash. Mods that i have done to her. Audio Mods: 6" Sony Xplode 190W (door speakers). 6x9 Sony Xplode 300W (Rear). 6x9 Kenwood 350W (Rear). Sony Xplode head unit (Aux/CD). Sony Xplode 650W amp. 12" Sony Xplode 1000W sub. Performance Mods: Extractors, 2" sports performance system (cat back), High flow cat. Free Mods: Cut Gear stick 3/4" Removed unwanted Badges. Interior Neons. Futer Mods: 15-17" Mags Perfessional home Paint job (super cheap $300) 32/36 DGV 5A Weber, Craby. Will post some pics soon Also Replaced my 4 stock struts 2 heavy duty after i needed a new front 1 from crash anyway Plz feel free to comment.

yeah thxs man. atm i am currently looking at 32/36 DGV 5A Weber. rebuilt for about $300-$400... of Ebay

if its ur CV joints its more like a clicking sound. so for a rattle i would suggest break bad clips.. this does not mean they will fall out or fail u it simple means that one of ur clips for ur break bads have fallen out. the clips r there 2 stop rattling..

hey guys. i have a Holden Nova AE-92 4A-FC. i have got a 2 inch sports performance exhuast system cat back, sports performance Extractors, Sports performance Cat. Next upgrade i want 2 do 2 the engine is Weber carby... however i am having probelms finding them localy. any 1 know where i cud pick 1 up apart from Ebay perfer 38/38. Price range $500 Max. Self installation. also would i need a spacer plate or does the carby just bolt straight onto the mainfold

i have a Holden Nova 1990, AE82 4A-FC, with full exhaust system. in 5th at 100k i'm about 2800-3000, in 4th about 3400-3600

Hey guys my names Mitch, From Alexandra Hills i'm 19 got a Holden nova AE92 srry no pics atm will post some once i get a camra, and porb a new paint job lol apart from a old faded rust look the engine is a 4A-FC. and i am doing the car up, so far its got a complete sports performance exhuast. will have much more soon..

i have a Holden Nova AE92 4Afc . i recently got a full exhuast system (extractors, High flow cat, 2 inch sports performance with sports performance muffler on the end.. i notice a lot more power, a nice raw when in idol and sounds alot nicer at 100Ks. and has porbly doubled my car in fuel econ .. if u ask me money well spent $500

i have just recently got my Holden Nova AE92 4Afc a full exhuast system (extrators, high flow cat, 2 inch sports perfromance). seens i have got my exhuast i am getting a fair bit more power (enough to take down comodores and falcons) with a raw 2 the engine and about doubled in fuel econ. with no fuel intake upgrades or Cold air intake yet i was shooked how much more power i now have... and will definitely be working on fuel intake soon as i got some more money. If u ask me,, money well spent.