HIGH ROLLER Posted January 18, 2011 Author Report Share Posted January 18, 2011 Pedal box gooonnnee My ghetto-spec surge tank My missus actually put the dummy surge tank together, and did a great job! Thanks bub! Quote Link to comment Share on other sites More sharing options...
cuzzo Posted May 3, 2011 Report Share Posted May 3, 2011 Any updates one this mark?? Quote Link to comment Share on other sites More sharing options...
HIGH ROLLER Posted May 3, 2011 Author Report Share Posted May 3, 2011 Unfortunately no... Finally sold my moto tho, and debt free now so i'll be back on it asap. Should be going into Westside Mufflers for some fabrication work in July/August - Exh/WG, piping, diff, etc. Just saving up the cash atm...sick of doing things in bits and pieces. Quote Link to comment Share on other sites More sharing options...
_FNQ_rolla_ Posted May 14, 2011 Report Share Posted May 14, 2011 Hey there, I am just about at the stage of making my engine mounts like the ones you have in your car. Could you measure how wide the mounts are (outside measurements) that have been welded to your cross member. This is the measurements that I am after. Thanks Quote Link to comment Share on other sites More sharing options...
7FOUR7 Posted May 14, 2011 Report Share Posted May 14, 2011 sweet man what are you doing for a pedal box? Quote Link to comment Share on other sites More sharing options...
HIGH ROLLER Posted May 15, 2011 Author Report Share Posted May 15, 2011 (edited) I'll get measurements asap for ya buddy. 747: I have a Wilwood reverse mount pedal box already, will be using that with remote reservoirs. Also, finished mounting my ally hard lines (fuel feed & return) with associated P-clips and nutserts on the weekend, they look heaps neat I'm very happy with how they turned out. Attacking the intercooler/radiator setup over the next 2 weeks. Big thanks goes to my best mate Adam for his fabrication skills. Edited May 15, 2011 by HIGH ROLLER Quote Link to comment Share on other sites More sharing options...
HIGH ROLLER Posted May 16, 2011 Author Report Share Posted May 16, 2011 Hey there, I am just about at the stage of making my engine mounts like the ones you have in your car. Could you measure how wide the mounts are (outside measurements) that have been welded to your cross member. This is the measurements that I am after. Thanks 80mm is the number you're after my friend, just measured it. Quote Link to comment Share on other sites More sharing options...
_FNQ_rolla_ Posted May 16, 2011 Report Share Posted May 16, 2011 Thank you very much :y:. I'll put some pictures up I'm my thread when I start making the mounts Quote Link to comment Share on other sites More sharing options...
HIGH ROLLER Posted May 18, 2011 Author Report Share Posted May 18, 2011 Sweet. Did some grinding for intercooler fitting and fuel system designing today… Need to order the fittings for the fuel system, as well as some hose. will post pics and progress on Saturday. Quote Link to comment Share on other sites More sharing options...
7FOUR7 Posted May 19, 2011 Report Share Posted May 19, 2011 sorry if I've missed it but what brakes will you be running? Quote Link to comment Share on other sites More sharing options...
HIGH ROLLER Posted May 19, 2011 Author Report Share Posted May 19, 2011 you didn't miss. Wilwood Triple-MC Pedal box, no booster. probably do a Hoppers kit on the front & either keep the Hilux drums on the back or use a pintara caliper / falcon disk combo. Quote Link to comment Share on other sites More sharing options...
7FOUR7 Posted May 19, 2011 Report Share Posted May 19, 2011 sweet what size master cyl are you using? I'm doing r31 struts and brakes in mine with the wilwood pedal box as well. Quote Link to comment Share on other sites More sharing options...
HIGH ROLLER Posted May 19, 2011 Author Report Share Posted May 19, 2011 I assume you're using the r31 strut so that you can keep the ke20 stud pattern? As for mc size I have it written down somewhere, got recommendations from wilwood customer service... Think it's 3/4" for the front, 1" for the back? Or that could Wrong... Haha Quote Link to comment Share on other sites More sharing options...
7FOUR7 Posted May 19, 2011 Report Share Posted May 19, 2011 nah r31 is 4x 114.3. Using them for larger brakes and the fact that the struts are only 20mm longer than ke20 and almost bolt up Quote Link to comment Share on other sites More sharing options...
HIGH ROLLER Posted May 19, 2011 Author Report Share Posted May 19, 2011 oh ok, yeah but you're keeping with 4-stud. What diff are you using? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.