Weber Carb Cracking Noise, And Sparking?

[77_Rolla]

Hi, guys.

 

 

I need some help, why would my 32/36 weber on my 1977 corolla 3k, make cracking noise and spark with large flames .

I just installed carbie, the car start's for abit then dies, every time I rev the engine it makes a cracking noise, then it flames up in the driver side valve opening.

Can some help me?

I some suggestions

Edited August 1, 2008 by 77_Rolla

[Raven]

Its called too much fuel for the poor little motor.

 

Rejet it and reduce the choke sizes if at all possible.

[Budowski]

send pics of the flames this sounds cool :bash:

[Taz_Rx]

They're better with the timing 180* out!! :)

[rundell]

Ahhh i ahd same prob when i removed my carby. Make sure everything is put in right because mine was put back wrong and air was coming in a spraking and making flames and wouldnt start, lucky fior the RAA fixed it i had putt the accelerator bracket on wrong bit so air was getting in.

 

hopefully that helps