chester_fb Posted September 12, 2008 Author Report Share Posted September 12, 2008 yeah, now its back to way it runs stock, but its not getting any fuel out of the tank Quote Link to comment Share on other sites More sharing options...
chester_fb Posted September 12, 2008 Author Report Share Posted September 12, 2008 or could it be something to do with air being in the lines? Quote Link to comment Share on other sites More sharing options...
Falken_KE30 Posted September 12, 2008 Report Share Posted September 12, 2008 try putting a little bit off fuel in carby.. have you tried that yet? then crank it over. it should start and run for a sec or 2. which should pull all the air that is in the lines Quote Link to comment Share on other sites More sharing options...
beerhead Posted September 12, 2008 Report Share Posted September 12, 2008 (edited) I can see 2 identical size pipes. 1 is the breather, 1 is the fuel feed. The small pipe is the return line, and that's what your trying to draw fuel through. It doesn't have a tube going into the fuel :) Edited September 12, 2008 by beerhead Quote Link to comment Share on other sites More sharing options...
chester_fb Posted September 12, 2008 Author Report Share Posted September 12, 2008 ok just did that now, i didnt understand why u wanted me to do that before, mechanical fuel pump works, now to try that with the electric one Quote Link to comment Share on other sites More sharing options...
Falken_KE30 Posted September 12, 2008 Report Share Posted September 12, 2008 so putting fuel in carby worked then.... well what do ya know, i was helpful lol Quote Link to comment Share on other sites More sharing options...
chester_fb Posted September 12, 2008 Author Report Share Posted September 12, 2008 oh wait, it was just running on the fuel in the fuel bowl :) Quote Link to comment Share on other sites More sharing options...
Falken_KE30 Posted September 12, 2008 Report Share Posted September 12, 2008 well that solves that, it has to do with you tank then. try what beerhead said, check you put it on the right pipe, maybe switch em over and try from there? Quote Link to comment Share on other sites More sharing options...
chester_fb Posted September 12, 2008 Author Report Share Posted September 12, 2008 its the right pipe, i've even checked the manual and i don't really want to have to cut the other pipe if its wrong. the only thing that is different now then when i did it first was that i've cut that pipe Quote Link to comment Share on other sites More sharing options...
beerhead Posted September 12, 2008 Report Share Posted September 12, 2008 (edited) If you've got a compressor, undo your fuel line where the filter is under the bonnet and blast air through it, it'll make a mess under the back end at which hose it's linked to. Are all 3 pipes on the top the same? Edited September 12, 2008 by beerhead Quote Link to comment Share on other sites More sharing options...
Taz_Rx Posted September 12, 2008 Report Share Posted September 12, 2008 Dude....no offence, but installing an electric fuel pump is one of the simplest "do it at home" mods you can do to your own car. If you can't work out how to do it, maybe you should get a mate/dad etc to give you a hand befor you start a fire in your boot or something!!!!! :) Quote Link to comment Share on other sites More sharing options...
chester_fb Posted September 12, 2008 Author Report Share Posted September 12, 2008 i know exactly how to do everything, and i know how easy it is, and i have done everything correctly but it isnt sucking fuel out of the fuel tank, so I'm assuming something is blocked in the fuel tank i did the air compressor test, and it is the correct line, i also blew paint out of my engine bay :) so its not me that has made a mistake, something else has gone wrong Quote Link to comment Share on other sites More sharing options...
Taz_Rx Posted September 12, 2008 Report Share Posted September 12, 2008 May be a stupid question, but is there enough fuel in the tank?????? If you left things disconnected for a few hours some fuel would have evaporated, but not much. Was it low befor disconnecting the mechanical pump? Quote Link to comment Share on other sites More sharing options...
chester_fb Posted September 12, 2008 Author Report Share Posted September 12, 2008 nah man theres plenty of fuel in the tank Quote Link to comment Share on other sites More sharing options...
styler Posted September 12, 2008 Report Share Posted September 12, 2008 try blowing down that line going into your fuel tank and see if its blocked. else pump works - wired properly and flows correctly, lines are clear after pump, its self priming, tank connected correctly... i can't see why it wouldnt work? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.