Hey i gotta 70 mod ke20 and ive got some complete r31 struts with brakes lying around.. What mods would be required to fit to the front, and to fit to the back? Thanks

umm correct me if I'm wrong but how do you intend to fit the rear independent suspension off a skyline to a ke20?

Rear would be a no go unless you want to spend shit loads on mods and engineering. don't knwo what mods would be needed to fit to the fron tho

Isn't R31 almost directly interchangeable with S13?

r31 isn't IRS, shorten the long side, PM Bananaman about fitting the r31 struts up front as he has done this to his ke20.

Steering arm to strut bolt spacing is the same , i think you would need to remove the spring seat and put on some coil overs on or another smaller diametre spring/seats onto the strut , yeah as Jono says talk to Bananaman or YLD-16T on toymods they both have this setup in there cars

Feel like i've missed out on all the info and can't seem to find it. new to all this and have my ke20 safely stored and slowly worked on in the garage. got the r31 struts, ordered the coil over sleeve kit. is the camber plates all that i need afterwards in order to hook the stuff up? i'm good on the tools but however, lack when it comes to modification knowledge. happy to keep the 250mm rotors. starting small. n/a 4age 16v. but i feel that this will be an important mod if i wish to make more power down the track. also, any info or links to what diff/rear setup would or should be a appropriate and a brake booster as it doesn't have one which you all would know. something or anything would guys! cheers

Hi all, I also have a KE20 and a pair of R31 struts complete with brakes which I would like to fit with coil overs & adjustable camber plates, any info would be greatly appreciated. 

Cheers John. 

Here’s some info after a quick search of “KE20” with bananaman as author  

Also have a look and see if he has a build thread