FWD are gay.

You only think that cause you can't shove macca's trays under your back wheels :hammer:

You only think that cause you can't shove macca's trays under your back wheels :hammer:

 

don't need maccas trays if you have RWD :y:

 

Might try and chase up some KR42's

so what saab use the same stud pattern what??? :hammer: I'm looking for the same thing found hyandai ones but had the wrong offset and looked like crap so now I'm still chasing too

 

Yeh the ones I'm getting are of a SAAB 900. 114.3 PCD x 4 studs

 

There those ugly boxy looking early 80's SAAB's, should be plenty at the wreckers. Best bit is they are RWD so look the part.

Best bit is they are RWD so look the part.

 

SAABs are FWD....they just might happen to have a RWD-style offset. These days FWD and RWD have very similar offsets, its only when you go back and look at older cars that there is a significant difference between the two.

I'm guessing echo rims wouldn't fit does anyone know?

 

il try my sisters echo spare on my ke 30 tomoro if no one replys n let u guys know

most likely be 4x100 pcd

i picked up the rims today and they fit sweet, very close to the strut tower mind you, so ill be running some 8mm spacers but that should do the trick hopefully.

 

Nice and tight with some 185/50/15!

most likely be 4x100 pcd

 

ah k thought so pretty much only pre 90s cars would have a 114.3 PCD offset

 

Do u have any pics of rims as yet nikctime21 ?

id like to see them cheers

Edited April 19, 200917 yr by muzke30

i picked up the rims today and they fit sweet, very close to the strut tower mind you, so ill be running some 8mm spacers but that should do the trick hopefully.

 

Nice and tight with some 185/50/15!

 

 

What wheels did ya get?

pics of said saab 'chaser rims' please

http://www.rollaclub.com/board/index.php?s...st&p=337496

 

These have a pretty FWDish offset and are said to not even be able to get on the hub properly as the tyre hits the strut.

pics of said saab 'chaser rims' please

 

This is them from the ebay, i test fitted them the other day.

 

 

I'm going to run them with 8mm spacers cause they are quite close to the strut and id rather avoid it hitting them.

No tires yet cause I'm broke, but running 8mm spacers and some 195/50 or 45/15 cause i found 185/50/15 is super hard to get

 

 

also the next step is to decided what colour to paint them ive got some thoughs

 

1. Silver gloss with normal tires

2. Matte black and a thin white wall

3. Gloss black with a red wall

4. Gloss red with a white wall

No tires yet cause I'm broke, but running 8mm spacers and some 195/50 or 45/15 cause i found 185/50/15 is super hard to get

 

yeh a 195/50/15 will fit with a 8-10mm spacer

 

I run a 165/50/15 on mine with a 5mm spacer

 

175-185/50/15 don't exist unfortunately

don't mean to sound like a dick but what do u use for spacers fabricated bushes or washers or what