k-sevkid Posted March 16, 2010 Report Posted March 16, 2010 does anyone know what the go is with the blanked out valley holes in the standard 4k head gasket Quote
Taz_Rx Posted March 16, 2010 Report Posted March 16, 2010 That would be the front end of the gasket. They have block out holes at the front and bigger holes at the back to try and promote coolant flow through the back of the head. Otherwise the water flow will just take the easiest path at the front and straight out the thermostat. Quote
k-sevkid Posted March 16, 2010 Author Report Posted March 16, 2010 cheers man. there are still holes blanked out at the back of the head though and one of them has blown through could this be why my coolant and oil are mixing there is no cracks in the head and this is the only thing i can find wrong with the gasket Quote
ke70dave Posted March 16, 2010 Report Posted March 16, 2010 sure the head isnt warped? best of taking the head down to a engine shop and getting it pressure tested and checked for straightness. i too noticed the weirdness of the 4kc headgasket when i changed it on a mates car. Quote
altezzaclub Posted March 16, 2010 Report Posted March 16, 2010 ..and the water hole would never blank over an oil hole. You have a problem somewhere else, either warpage around the oil pressure hole, or a nasty crack somewhere inside itto get oil in the radiator. If its water in the sump then any warps in the middle will let water drain back into the sump. Quote
k-sevkid Posted March 16, 2010 Author Report Posted March 16, 2010 yeah didnt think theyd blank water hole over a oil hole thaught about it after fair stupid question my bad. and also ran a straight edge over the head its a tad warped cheers for the help :wub: Quote
Taz_Rx Posted March 16, 2010 Report Posted March 16, 2010 Can I also suggest that when you get a new head gasket to spend the $80 odd on a genuine toyota one. You'll be able to see how much better they are than generic re-pro ones. Quote
k-sevkid Posted March 17, 2010 Author Report Posted March 17, 2010 i just got a valve regrind kit 48 bucks from sprints but yeah the generic gaskets are fair average cheers anyway Quote
k-sevkid Posted March 18, 2010 Author Report Posted March 18, 2010 hey peeps new problem my 4k is currently not running and is missing a shit load of vacume lines I'm not worried bout all that anti polution shit but need to know witch ones are needed for the car to run smooooothhhhh cheers Quote
Grand Master of Awesome Posted March 18, 2010 Report Posted March 18, 2010 http://www.rollaclub.com/faq/index.php?tit..._System_Diagram Quote
k-sevkid Posted March 18, 2010 Author Report Posted March 18, 2010 sweet this site has it all cheers man u just made my life so much easier :wub: Quote
Grand Master of Awesome Posted March 18, 2010 Report Posted March 18, 2010 no worries, the knowledge base/FAQ has basically everything you need for a k series engine. (and even things you done O.o) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.