Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Jesse'S 71'

Featured Replies

Ohh True, I have a feeling my box's oil hasn't been changed since factory ;)

So it will be interesting to see what comes out. Is there anyway or anything to put into the gear box that will circulate and clean out the crud... Like abit of diesel or an aftermarket solution. OR do you just put new oil in it and drive for a month then drop the oil again and refill?

 

Also I bought some UV joints for my tail shaft. Should I fit them before I fill up the box because, Will oil piss out the back if I take out the shaft?

Otherwise that would be a waste of oil if that does happen :wink:

 

please shed some light. Danke schon!

 

I just put my new oil straight in and I'm going to change it agin in a week or 2 to give it a flush out there should be something on the market to flush it out with though. I am pretty shure you should be okay putting your new UV joint in even when your gear box is full as log as its not over filled, but for pice of mind may as well do it before u change the gear box oil, or if your worried bout it leaking out u can always just whack a drain tray underneath it :D

 

I also filled my gearbox from where the shifter sits as it is a lot easier than trying to get it through the fill plug.

  • Replies 217
  • Views 68.1k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Did what wrong exactly? Removed it and didn't match mark it? I never match mark tailshafts and I've NEVER had a problem.

Posted Images

  • Author

True true. I was actually gonna fill up the gear box from the shifter. I might yet. Before i put all the trim and stuff back on. Seems a hell of alot easier. and i don't want to spend 50 dollars on a pump for 2 dollars worth of oil.

hey dude.. them rims are delta streets... good rims

  • Author

True. Yeah they will look fat hugging the road with some suspension work under her :D

 

I am gonna polish them to a smile revealing shine and paint the inside of the splines a nice colour that comments the cars beauty ;)

True true. I was actually gonna fill up the gear box from the shifter. I might yet. Before i put all the trim and stuff back on. Seems a hell of alot easier. and i don't want to spend 50 dollars on a pump for 2 dollars worth of oil.

 

Very true man i couldnt justify buying a pump so in the top she goes haha. :D

  • Author

Haha To easy :D

 

ill keep you posted on progress man. good luck with your car.

Haha To easy ;)

 

ill keep you posted on progress man. good luck with your car.

 

Looking forward to it man :D

Is it the same colour as my car?

 

If so don't hate 7shades and others, I've grown to love it :wink: ;) :D

 

6176_225571625625_783390625_7700185_2783511_n.jpg

  • Author

yeah man. Same colour as your. I love it aye :D

 

Except its heaps faded. I'm just gonna do the bonnet, Roof and Boot lid. That's all that's really faded and the little dodgey bits and the guards :)

 

Nice car dude By the way ;) Ive seen all your cars vids on Youtube and shit :wink: Love it!

  • Author

Got some cash flowing so I am trying to source some things for my car.. A.k.a Paint etc.

 

Would Acrylic paint go alright? or.. what would you recommend?

No derro's that are trying to screw me over answer that question though :) Thanks!

Clear on Base is good and very easy to do. off the gun good finish. jst suss out both of my project threads.

 

basecoat is like an acrylic but not quite. applied in the same manner and mixed in the same manner. the clear is 2 Pack and can be buffed to mirror finish if you like.

 

a 2 pack primer is required though.

well what else do you want to know. if its isn't a metallic colour then you can use acrylic and buff it till it shines. easy to do. just in my opinion not the strongest paint.

or if it metallic you can try acrylic colour and acrylic clear.

again as above not the strongest paint. 2 pack clear and basecoat will outlast it.

 

or you could go a 2 pack colour generally metallics aren't in 2 pack colours.

so if its a straight colour you could spray it... it ISN"T easy to get a good finish.

i recently did a 2 pack job and it was ok-ish. needs rubbing back and polishing.

 

acrylic is easy... great for the DIY but not a durable.

 

Clear on base is a bit harder to do but easier than straight 2 pack but more durable than acrylic..

 

and i would think that straight 2 pack yould be the most durable.

oh also you can't spray 2 pack clear on ACRYLIC unless its an ISO free clear. and goodluck finding one cheap. those clears are very expensive and becoming

less common.

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.