hi i have not long picked up a gearbox for my 4age conversion,its a rare cable clutch k50 with an a series bellhousing integrated into the gearbox (it came out of a ae70 with a 3au).

 

my problem is that the input shaft is 19 spline as its a k series box and the origional flywheel or preasure plate off the 3au wont line up to the 4age.

 

so just wondering ,will a k series heavy duty clutch plate work inbetween a 4age flywheel and preasure plate?

or will i have to find a clutch plate thats 19 spline and the same diameter as the 4age flywheel?

 

any help would be apreciated

 

cheers

Edited June 15, 201016 yr by rolla rookie =D

or will i have to find a clutch plate thats 19 spline and the same diameter as the 4age flywheel?

 

:lol: Might need to get something custom made to suit.

;) Might need to get something custom made to suit.

 

 

dammn aye was hoping it was gonna be an easy fix bt ahwell haha.

 

but i will give the k series clutch a go once its all up and running,c how it goes lol

 

cheers for the help taz rx

i think the clutch out of a al21 or al25 tercel fits that(check the splines). the other thing to check with that g/box is what side the cable is on as they did have a model with a cable on the l/h side (bloody long cable)

Edited June 18, 201016 yr by trd

not really an answer, but take your plate to a brake shop. I had a corona g'box on a holden red motor and was able to mix clutch and pressure plates off the shelf. I'd guess there is a clutch plate out there

if it needs to be custom maybe it'd just be smarter to go a t50 of an a series engine?

T50 is a much nicer box to deal with than a K50. BTW the exedy webpage has all the clutch spline and diam data online.

alright cheers for the help guys ill just ask a few places and do some more research and c what i can find.

 

and the k50 was dirt cheap so thats why i got it and makes the conversion a lil more easier (asuming i don't have any issuse with the clutch),though probably will go a w series box when i start producing more power later.

 

the cable is also on the drivers side tooo so its a direct fit into the ke70 ;)

 

ill have more of a look on the excedy site but all the tercel clutches i looked at were strangely 21 spline so hopefully i missed one lol

 

apreciate the help-cheers