i've searched but found nothing, in my e7 sedan the chasis rails are easy to place a jack stand under but in my wagon the leafs are in the way of the rail, and i want to replace the bushs on the leafs and flip one of them,

where can i put the stand?

Under the sills.

Sills can crush a bit unless you spread the load-

 

Must be a chassis rail somewhere under there as an alternative.

just infront of the spring eye

Sills can crush a bit unless you spread the load-

 

Must be a chassis rail somewhere under there as an alternative.

 

Not if you have proper stands.

its only flimsy sheet metal in the sills, i've crushed a vls sills doing that

Edited August 20, 201016 yr by rhys2229

its only flimsy sheet metal in the sills, i've crushed a vls sills doing that

 

Not if you have proper stands.

 

And with that I am off as I have not had a problem.

Just thought I would do 1 more post as something came to my mind.

 

If the sills are so weak then why is the toyota scissor jack a sill located item to which the sill bottoms out in the groove?