hey guys, I've been looking at some XXR 002 wheels and I'm just curious as to how wide, and what offset wheels i'll be able to fit under a KE70 82 panel van without rolling guards etc.

 

Cheers, Josh

Ke70 panel van, assuming it's the same around the guards as a KE70 sedan.

You should be able to put 7' wide rims with anything above 0 offset. Definitely 6.5' wide.

 

Of course, this depends on how low your car is as well.

You can hypothetically put 10' wide rims with a -20 offset on standard height because they won't bump into anything because the KE70s sit like a 4wd, haha.

 

I've got springs that are about 2 coils lower in the rear, with 14'x7' rims about a +2 offset - and they fit nicely.

Rolling guards is easy though - hairdryer and a rubber hammer that wont mark the paint.

15x8 +-0 with 195/55, slight roll.

hey guys, I've been looking at some XXR 002 wheels and I'm just curious as to how wide, and what offset wheels i'll be able to fit under a KE70 82 panel van without rolling guards etc.

Learn to read Jacob, gosh.

 

But seriously I'm with Jacob, get the 15x8s and get 133% more dish :cool:

Edited September 21, 201115 yr by rianwest

hmm good stuff, yeah could go a roll i spoze, and will 8's with 0+- work front n rear or shouldi throw 7's on the front? just after heaps of ideas

175/55r15's***** won't need a roll then haha.

8 all round will be fine.

 

Standard Suspension? not running xt130 lca's or anything in the front that provides camber? I'm going off what i've run on my cars with 14x8's. 14x8 +- 0 is a perfect size for the rear with 175/65 or 185/60. Panelvan rears actually hold a bit better offset than sedans, from what i noticed when i owned one.

Same with the rear of my T18 as well for some odd reason.

9's all round is sweet. :happy:

will 15/8S be legal in nsw without engineering etc.?

You allowed 2 size's up or down from standard size rims. They were realesed with 13"s so 15" is fine.not to sure about track tho, thinks its also 2" overall.

They come factory with 13x5.5 so no not techincally legal but i haven't heard of anyone getting done for them. Keep stockies in case ;)

How about 15x8 with a +25 offset all around? panelvan will be lowered with 86 front struts and haven't thought about changing lca's.

15x8 +25 will foul on the front struts probably

Thats what I was worried about :(