ke78rolla Posted April 28, 2012 Report Share Posted April 28, 2012 For this i used a broken VT Commodore window regulator which wasn't as good as the VR commodore motors i used in my car as the VR motors used normal bolts and the holes lined up easier you also have to reverse the motors passager VT/VR motor to driver side and drivers side VT/VR motor to passager. BROKEN VT REGULATOR REMOVE SCREWS TO MOTOR STANDARD KE30 WINDOW REGULATOR REMOVE SPRING CENTER PUNCH AND DRILL 3 PINS HOLDING WINDER WITH 6MM DRILLBIT CUT OFF GUARD ALIGN GEARS TO CENTER TO REGULATOR MEASURE YOUR BRACKETS ON 2INCH WIDE GALV DRILL HOLES 4.5MM FOR SCREWS AND POP RIVETS POP RIVET AND SCREW BRACKETS FINISHED 1 Quote Link to comment Share on other sites More sharing options...
JDM55 Posted April 28, 2012 Report Share Posted April 28, 2012 very cool,good info!! lets see it working next ^_^ Quote Link to comment Share on other sites More sharing options...
ke78rolla Posted April 28, 2012 Author Report Share Posted April 28, 2012 wiring diagram dpdt rocker switch from jaycar $7 Quote Link to comment Share on other sites More sharing options...
towe001 Posted April 28, 2012 Report Share Posted April 28, 2012 Thats awesome, even the gears mesh properly. Quote Link to comment Share on other sites More sharing options...
ke78rolla Posted June 2, 2012 Author Report Share Posted June 2, 2012 sorry it took so long to post this video been busy with other projects http://www.youtube.com/watch?v=eqmxzMBm6Cw&feature=youtu.be Quote Link to comment Share on other sites More sharing options...
Bowler Posted December 2, 2012 Report Share Posted December 2, 2012 Hi. Great effort. Have you encountered any issues with fouling of the window on the motor? Quote Link to comment Share on other sites More sharing options...
ke70 alan Posted January 3, 2013 Report Share Posted January 3, 2013 does anyone know if this could work with the ke70 reg? Quote Link to comment Share on other sites More sharing options...
NinjaMekanik Posted January 3, 2013 Report Share Posted January 3, 2013 anyone else see that or am i just strange. lol Quote Link to comment Share on other sites More sharing options...
ke78rolla Posted January 6, 2013 Author Report Share Posted January 6, 2013 hay sorry for the late reply i did have a slight fouling issue by 2mm so i jimmied the motor over in the door fixed the problem and didnt damage anything. i now have to remove the passanger side motor as some dirty person tried unsucessfully to break in to my car but hoping for just a busted wire. i couldnt see why it wouldnt work with a ke70 but don't have one to try it on so i don't know.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.