Do I Have A T Series Diff?

[iwontarolla]

hey guys,

so i bought a t series diff out of a rt132, i plan on cutting all the mounts of and setting it up for my panel van. i pulled two out and got all the got bits and spare axles. both have 10 bolts same axles but one of them has a lone stud in the diff housing and one doesn't what does this mean? i should of researched more but both cars had t312 diff codes what are the differences between the two?

 

thanks guys

Edited June 27, 2012 by iwontarolla

[iwontarolla]

Any one?

[ke70dave]

where is the "lone stud"?

 

i confused.

[corollaart]

Measure crown wheel dia (6.7inch) ,and axle dia should be 24mm.The axle face to axle face should be 1410mm.=t series

 

Not sure about the extra stud ??

 

rob

[dbr11k]

.

Edited July 4, 2012 by dbr11k

[iwontarolla]

Lone was a auto correct. There is no long stud in the housing, between the two the centre housings where both diffenrent.

I'm a little confused how you measure the crown diameter?

Every thing leads to it being a t seires, but I just have never seen one with no long stud.

[rosco-ta22]

yes if that was the code on the cars,t312 the code means = t series x 3.91 ratio x 2 pinion, there are 2 lenghts 1375 and yes 1410 . 1410 should have larger bearings from memory 71mm and 25mm axles, axle lenght is 690 from the hub face, both axles should be the same lenght, p.s.if you have a spare axle let me no need one

[rosco-ta22]

Axles: Displaying 2 axles Code Ring Gear Ratio Centre Width (mm) Weight (kg) Linked Chassis T312 6.7" 3.90:1 2-pinion open 1410 N/A T312 6.7" 3.90:1 2-pinion open 0 N/A