liamke70 Posted September 2, 2014 Report Share Posted September 2, 2014 took my ke70 over the pits today and found out the demister dosnt work, its not blowing any air any suggestion why?? any help will be much appreciated :) Quote Link to comment Share on other sites More sharing options...
peterd Posted September 3, 2014 Report Share Posted September 3, 2014 is the fan connected? it's got two terminals that connect to the demister box. fuse? Quote Link to comment Share on other sites More sharing options...
altezzaclub Posted September 3, 2014 Report Share Posted September 3, 2014 Get out your trusty $10 multimeter and turn it onto 12V DC. Put the black lead on a metal fitting for earth, unplug the wires on the fan and stick a probe into each wire with it all turned on. If you can find a 12V feed there then you know power is getting to the fan, it should be the LG wire. You can see from the diagram the main feed is through the heater fuse and the relay is switched on via the wiper feed. So full power goes to the heater motor and the speed is controlled via its earth, like the headlights work. You should have power to the LG (blue/green) and the LR(blue/red) with with ignition switched on. If there is no power to LG it is a fuse or wiring connection, but power to LG and not LR means the motor is burned out. If you have power to both those and the heater fan doesn't work on "high", then the switch or it's earth is borked. Quote Link to comment Share on other sites More sharing options...
tojo2 Posted September 3, 2014 Report Share Posted September 3, 2014 could also be worn brushes. Toyota wont have any but you can probably find something useful at a bosch dealership. Easy enough to change but will need soldering Quote Link to comment Share on other sites More sharing options...
liamke70 Posted September 15, 2014 Author Report Share Posted September 15, 2014 turns out that the cable connection to the switch was broken, so it was stuck on vent kinda looks like someone cut it, which i thought was weird pushed the cable in and now its stuck on defog, which is fine as i need it to get over the pits Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.