Hey guys. Got a 5k ive almost finished and am looking for some custom made ball cup 182mm pushrods. Has anyone had any luck with some idea of where I can get them made. Ive heard heaps of suggestions like diy/ put in adjustable. Ive been told crower or jet engineering but hoping someone on here might know a good source?? Cheers

So you've got a 5k with dished pistons and accompanying head. But you converted it to solid lifters and now need pushrods to suit?

Am I correct?

 

Wait no.

Gutted 5k lifters?

Edited November 12, 201411 yr by GJM85

Smack bang on it! Running 3f solid landcruiser lifters. 4k rocker gear. 5k worked head o/s valves and 40thou over 5k block. Needed adjustable rockers for solid grind cam

4kc pushrods are 182mm is there not enough adjustment in the rocker?

hey well thats embarrasing!! ive been using 3k rods cut down and tapped to make adjustables, never occured to me that length, or the fact i never had any here to measure to 4k. off to the wreckers for some 4k rods by the look of it. hopefully i can get away with the adjustment, and if not ill get some customs. cheers

Couldn't get a hydro cam grind??????

If you don't like what you find at wreckers Google 13781-13020

 

Lots of Companies claim they got them

Coulda gone hydro but he wanted more valve adjustment. Set at 12thou. 505lift 28x duration. Need 181mm rods to be exact but will sus out the 4k. Cheers