lappy Posted May 3, 2007 Author Report Share Posted May 3, 2007 Finally the day has arrived that I can drive the car i have put my time and effort into woo :jamie: As of about 4:00 today i shall have my learners permit YAY :fuzz: :y: Quote Link to comment Share on other sites More sharing options...
ZEROSKULL Posted May 3, 2007 Report Share Posted May 3, 2007 cool project. The rust bit that you had on your car was the same as mine. Quote Link to comment Share on other sites More sharing options...
lappy Posted May 3, 2007 Author Report Share Posted May 3, 2007 I'm on the road my first drive of my car after my work on it alot different to the speedway car aswell :hmm: needs more power in the old 4K :S Quote Link to comment Share on other sites More sharing options...
madrolla68 Posted May 3, 2007 Report Share Posted May 3, 2007 I'm on the road my first drive of my car after my work on it alot different to the speedway car aswell :cool: needs more power in the old 4K :hmm: Buy my 7K then man :S Quote Link to comment Share on other sites More sharing options...
JiP Posted May 3, 2007 Report Share Posted May 3, 2007 WoW 7K!!! If only you were up here :S Quote Link to comment Share on other sites More sharing options...
lappy Posted May 7, 2007 Author Report Share Posted May 7, 2007 well here is my latest purchase a set of 14x6 hotwires with a fairly used set of Yokahama Advans 032-R'sfor only $150 I will buy a set of road tyres for the and groove up the advans and put them in the shed for if i eventually do track days or hillclimbs. Quote Link to comment Share on other sites More sharing options...
Taz_Rx Posted May 7, 2007 Report Share Posted May 7, 2007 Did well on those wheels and advans for $150!!!!!! :S I just bought a second hand set of A032's that have done for 12 laps of symmons plains for $350 JUST FOR THE TYRES!!!!!! :cool: And any car looks heaps tougher wearing a set of these! :hmm: :hmm: Just keep an eye on that one that you pictured alone, cause it looks like a re-tread (although it can't be) and is starting to de-laminate!! :yes: cool! Quote Link to comment Share on other sites More sharing options...
lappy Posted May 7, 2007 Author Report Share Posted May 7, 2007 I thought they were a good deal + they came with a full set of brand new wheel nuts. I will keep and eye on that tyer i thought that was just a yokaham factory thing. Quote Link to comment Share on other sites More sharing options...
lappy Posted June 1, 2007 Author Report Share Posted June 1, 2007 (edited) *update* I bought a ex speedway motor that was super illegal so the guys sold it to me its all balanced bottom end and a lumpy cam shaft its a short motor and not done any work as it was that crazy with head and other mods that it was never able to run but so i will put the head and ancilleries from my motor now. Photos tomorrow and build coming soon :bash: Edited June 1, 2007 by lappy Quote Link to comment Share on other sites More sharing options...
lappy Posted June 3, 2007 Author Report Share Posted June 3, 2007 (edited) Here are the pics as promised block with barely ran pistons rings and bearings, fully balanced bottom end, balanced + lightened flywheel, cam and spare set of balanced conrods. Also my newest creation a gear lever for my racecar :bash: Edited June 3, 2007 by lappy Quote Link to comment Share on other sites More sharing options...
lappy Posted June 7, 2007 Author Report Share Posted June 7, 2007 I bought these off ebay last night. Ad said "TOYOTA COROLLA KE30 Pedders lowered front springs. Springs have been trimmed by previous owner, approx 2.5 inches lower than standard and approx 250lbs." so they should be good and get rid of that 4x4 stance of my corolla :P Quote Link to comment Share on other sites More sharing options...
NickZ Posted June 8, 2007 Report Share Posted June 8, 2007 they don't look like pedders lowered ke30 springs, i got a set and look nothing like them, unless they are soft the top is only just going to sit in the top hat maybe dangerous if they have been cut. Quote Link to comment Share on other sites More sharing options...
lappy Posted June 9, 2007 Author Report Share Posted June 9, 2007 i have a set of king springs in my racecar and they look like thesethey should be fine Quote Link to comment Share on other sites More sharing options...
lappy Posted July 3, 2007 Author Report Share Posted July 3, 2007 (edited) I bought a central locking kit off ebay a few weeks ago for $50 and i Installed it today. Well I strated at 9:00 this morning and finished at 5:00. it is very easy to install. The kit comes with a fulll wiring harness, 2 controller, 4 motors, lock rods and connectors. Once the wiring is layed out I took out the front seats and undid the back seat so i could put the wiring under the carpet. The only drama i had was that I had to do was extend the rear leads to reach tho the locks. here is a pic or the right rear lock installed Front lock Its great for the amount of money I paid for it and I am very satisfied with it if any one else wants more ino just ask or pm me Edited July 5, 2007 by lappy Quote Link to comment Share on other sites More sharing options...
lappy Posted July 5, 2007 Author Report Share Posted July 5, 2007 (edited) Driving at 100 Km/h is a very loud experience in the corolla so in an effort to cut don the noise i bough new baileys channel which seals the window. When I looked at mine it was old hard and brittle and not much of it left :) But I bought 4m of it which is just enough to do the front 2 door which where the loudest. Here are3 some pics I will report later at the noise difference The New stuff Old Stuff Finished Edited July 5, 2007 by lappy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.