Ke55 Axles In Ke20 Diff

[J-B]

Bringing back an old post.

 

Does anyone know if KE35 axles will work with a KE20 diff? or does it have to come from a KE30 rear end?

[styler]

Theres 2 models of diffs:

The Aus diffs are the Aus Borg Warner rear loading centres, no housing

The Jap diffs have the Jap front loading centre in a complete housing.

 

There are 2 diff widths and pcd's

The ke2x has 1320mm diff drum face to face measurement (4x110mm pcd)

The ke3x has the 1355mm diff drum face to face measurement (4x114.3mm pcd)

 

Not sure on interchangability but someone mentioned cut down axles of the same model would work,

most likely same model with different type of width cut down to suit, maybe some research could be

worthy as last i looked the 4x110mm pcd flange is too small to redrill to 4x114.3mm pcd flange.

Edited July 29, 2015 by styler

[J-B]

I know that the KE30 axle cutdown by 5mm will work in the KE20

 

I'm just not sure if the KE35 has the same diff or if they are different between the KE30 and KE35

[Taz_Rx]

Just stuck your head under the back of it and see if it has a borgy - will have a backing plate, or a banjo diff.

Otherwise upload a pic of the diff and we'll tell you.

 

My guess would be it has a banjo.

[J-B]

Yeah my KE20 has a Banjo so I would find a KE30 with one. But is the banjo diff in a KE30 the same as one from a KE35? (assuming KE35's ever came with a Banjo diff) I don't want to overlook KE35's parts if they will work the same as KE30 parts.

 

I just don't want to get a KE35 banjo and not have the axles work in my KE20 banjo diff if that makes sense?