Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 03/07/25 in all areas

  1. This video, will take You 24 minutes to watch. Do Not turn it off, until the very end. No, It's not an announcement that Toyota is to reintroduce the 4K engine to it's current line up ! However, I'm sure You will come away from it, with a whole new perspective, if You were one; that believed; that all us, would be driving electric cars, by the end of this decade. https://www.youtube.com/watch?v=1WNz1Hru_9I Enjoy ! Cheers Banjo
    1 point
  2. " the ICV is stuck open and squirting carb cleaner into the throttle body hole alone will not always free it. Unplug the cable to the ICV, undo the screws holding the electronic device to the body. Once removed see if you can spin the electromagnetic actuator on the body back and forth freely, if not that is the problem. To sort it remove the middle hose below, not the water hoses, then place your finger over the hose outlet whilst filling the hole in the throttle body with carb cleaner, this will ensure it is flooded with cleaner and not simply draining down where the hose was connected. Keep the fluid in there for ten mins whilst trying to rotate the actuator until it is freely moving then reassemble. This problem not only occurs due to gunge but also if laid up for a long period when oxidisation can seize the shaft, could also by why used parts often do not solve the problem as they have been laying around unused." Give it a go... I found it on a Cressida a few years ago.
    1 point
×
×
  • Create New...