Jordain

My 69 has belts, Although from the holes... it deficiently was not a factory done job. Different sized holes and a real dodgy fitments haha.

Where are you located? Got any pictures of the ke10? 5k/5 speed with side draft weber's and extractors would be nice.

Well I've done a Fair bit of progress Sorry for the Horrid Iphone pictures. Shortened and strengthened ke55 pedal box, Strengethened Firewall too. 15x8 rear rim's 15x6 front rim's 15x195x50 rear tyre 15x185x50 front tyre Stripped Interior, exposing that rx7 tunnel :jamie: Rubbed back boot, Going to grind those stupid number plate holders off soon. Rear winder rust fixed up, Plated from behind. Smere of body filler. I'm deciding on the front suspension, Still abit lost but need to do a heap more research before I decide on anything. Leaning towards this though Still need to work out what i'm going to do though.

Here's some pictures. The modfied tran's tunnel. 4k I think lol Modified trans tunnel Stripping of the door Inner door Skin

I'll go take some pics. It's got a modified tran's tunnel.

Cheer's, I may have my hands on a 7rib - small port motor. I'll have to find a t50 box then get a move on. Still cutting rust out.... and treating it. Hopefully finish both door's tonight.

I got them for the body, but the left door has about 5mm of body filler all over it for some unknown reason, there is a tiny dint in the door and a little rust in the bottum but not in the bottum, it's about 7cm from the bottum lip? I will keep stripping this door haha, the other door i will only half strip and prime up.

any recommendations on gearbox's ? I have been taking it easy, Got the 40 year old panel beater/spraypainter/full time car builder watching everything I do haha! Should be right, hopefully have both doors, boot and the body stripped by the weekend. Got one door 3/4 stripped. Still need to actually strip the car out! I nearly burnt a hole in the new carpet whilst welding the sill, Smoke was pooring out of the car and the foam was on fire lol. Jordain.

If I keep the wheel's, I would get the centres painted black and I'd polish the rim's and have a go at straightening them since they have a little gutter rash.The wheel's are going to get the flick. Unless I find a way to fit them under the guards. I've been a tad busy lately and I'm going away this weekend gokarting, but next weekend i've got some mates coming over with wire brush angle grinders and some paint stripper. Car will hopefully be completely stripped and today I bought myself a neat little sand blaster. Keen to sand blast some part's of the car! There will deffiantly be some work done next weekend!! So be prepared to burn your internet download GB's haha. Still reading a shitload of RTA guidelines and researching 4age motor's. I think I want a 16v - 7 rib block with squirters, w56 Supra gear box and a hilux diff. I want to do a majority of the work on this car myself, I have access to a workshop with lathes, mill's, a very small and simple cnc mill and a few other goodies so I will try make some cool things. Cheer's nobbler, I actually had no intention of buying a car 3 week's ago. I seen this ke10 on ebay and .. well I decided I wanted a car and my mum would much prefer me in a car than on a 50cc motorbike lol. Jordain

Hi, Thank's! I picked it up for $1600. It was on ebay advertised for a while. I love the wheel's, Actually.. It was one of the main reasons I bought the car. I need to put new tyres on them as the rear's have dunlop slicks and the front's are just some old rooted tyres lol. The wheel's don't actually fit on the car though, I'll need to flare the guard's.. but I don't want to wreck the body since there is no rust in it.

Hi, Well I picked up a ke10 off ebay a week or two ago. I was pretty excited when I picked it up because It was my first car, and It is my favourite car. I love ke10's and I can't wait to build it. My dad and uncle have had abit of history with ke10's, ke17's. ke16's, celica's.. basically any hot car haha. So they were pretty happy when I said I bought a ke10. This is what i'm working with. -ke20 discs -simmons rims -3k motor I think -95% rust free in my opinion, Only rust in the bolt on panels -Pretty good interior, front seats are shot though. -I think it's been lowered. Here's a picture of my first attempt at removing rust I think I did a pretty good job, There were a few medium sized holes. Stripping process. More tomorow when I'm free and don't have assignments i'm ment to be finishing off!! :)

Name: Jordain Car: ke10 Motor & Driveline: 3k Suspension & Brakes: ke20 discs Wheels & Tyres: simmons Interior: DIY red vynil Body: not sure :) Other: First car, picked it up not to long ago. Virtually NO rust in this thing. I'm putting a 4age into it, supra gear box and a larger lsd diff. Cut the rust out of her, and keeping her White. This ones going to be a mean sleeper, Venetian's :bash: I will start a thread soon. I'm located in western Sydney if there's any vivid ke10's or similar lovers out there ;)

Love this, I've got a ke10 and planning to do the same thing as thing. Great to see another ke10 saved!

Awsome, Keep the pictures coming! Got plenty of GB to burn :P

I love this build, It's such a great car! The engineering that goes into it is awsome.