Gtr rolla

Yeah 7th Dave sounds good ill be there this time :)

Hey guys I am looking at getting my ke10 reupolstered original look,soon and I was wanting to see if anyone knows of an upholstery shop in melbourne that's well priced and does an ok job ? Also if anyone has recently had a car done and what did it cost them ? Thanks in advance

Hi jix where did you see this ke50?

Hey guys spotted a ke55 sedan at pick a part kilsyth Look to have good panels motor etc Manual

Hi guys thought I would put my skyline On here it is listed on eBay I am not In a hurry to sell but I do need room r31 race car seris 3 heavily modifyed for circut work ,drag drift etc it has been built over the past year with mods as follows included in sale is stock engine and r32gtst turbo gearbox full mod list of all work and parts done rb20det turbo siver top with gtr clutch and flywheel r32 gtst gearbox engine has rb25 turbo and custom dump . engine has been professionly wired trust air filter rg race alloy radiator with davis craig electric fan and adjustable temp switch large front mount intercooler malpasi rising rate fuel reg three inch custom mandrel bent exhaust and exforce stainless muffler r33 gtr fuel pump body mods: full seam welded body and painted in two pac ford colour burnt orange series 3 front conversion jic full adjustable coilover suspension front and rear five stud conversion r32 gtr front brakes and gtr master cylinder and booster r32 gtr wheels full nolathane bush kit installed front and rear boot mounted battery series 3 taillights locked diff interior mods: bride zeta 3 low macs race seat saas wood grain steering wheels and boss kit sparko pedals s14 passager seat rear seats included in sale but not installed ( install yourself) nismo boost gauge mounted in dash this is all i have for now car is in very good condition and has been driven very few times since all work has been done as the car is not registerd selling due to many unfinished projects and no time to take it to the track regretfully this car must go there has been thousands spent and countless hours spent on this car any questions please ask i am NOT open to swaps unless you have a ke15 sprinter or ke25 corolla car sold as is inspections welcome I can't up load pictures as I only have iPhone at the moment Text me phone number and I can send some pics I am after $4500 for it I will not be wrecking it out And I will not swap unless it's a ke15- or 25 in good condition And cash adjustment if need be 0437684980 thanks Klayton Iam in Narre warren Vic

Hey nice 25 mate very neat !

Yep me coming for sure

Hey guys I have lowered my ke35 in the rear very low it seems now the shocks are to low to do any work, and the car is just bouncey, I want to know what other guys are using , short stroke ? And off what car? What brand? Thanks in advance

Hey mate are you still doing the 18rg in to your ke70? I've done it to a couple of ke30's before it's not a hard convertion as long as your got access to a welder to make mounts . You'll need a corona sump and pickup . The top hose of your radiator will need to be moved to the other side or use a celica radiator or some thing like it' You'll need to cut a hole for gear stick A custom tail shaft , throttle cable, hydro clutch peddal . There's a few more thing but just what you'd expect , if your still doing it and you need info at all let me know and I'll try help cheers

Hey dude was only a couple of wires . And some crappy wiring to the coil , I fixed that and it runs well ' have you found another rolla yet?

I just wanted to get a little cheap power out of it until I drop another engine in . I've got a pair of 40mm solexes manifold extrators and 2in exhaust I might lighten the flywheel' and I thought I might get some more comp out of it by swapping heads of just shave the 4k one

Hi guys as heading states is it worth putting a 3kc head on a 4kc is there any benefit or compression increase and is there a difference in valves and ports . Or just leave the the 4k head alone?? Cheers guys

I suppose if it looks stock they shouldn't be sus towards it

Yeah I think it's a load of BS too , he says beacause the 4k was not an option for a ke35 . He said just flap it in and try your luck! But I don't want put it in and be stuffed about over a pissy 4k engine. I only need it to get the redgo then it comes out for a bigger engine set up' witch I won't be worrying about engineers certs , I'll just keep the same numbers . Who cares 

I was just speaking with an engineer he says it might pass but it really should have an engineers cert for it . I am not sure what to do should I just wack it in and try my luck or not??

Oh ! Ok Sweet so should be good then thanks what about extractors do they consider that a power gain???

Ok! I suppose I just have to do it and find out . I guess If you got some one that knew then they might pick up on it? But it's hardly a massive upgrade

Hi guys my 3k's buggered , I am putting a good condition 4k in my ke35 , but is was wanting to know if there will be any problems with the 4k in there for the road worthy and vic roads . Because the 30's never had 4k in them . Has anyone done this with out any hassles ?? Thanks

Hi iam wanting to build a replica te37 levin but I need the wheel arch flairs does any one know where to get them? Or does any one know if te27 flairs are the same because theres a set on eBay thanks

I agree I don't like the late ones , thanks mate I'll look in to the dash doctor cheers

So does anyone know where to get a new dash or a place that can recover them?? or does everyone just leave There dash looking like sh@"

Yep mines a jap one

It's the early one

Hi guys just got my self a really good ke35 . As usual the dash is stuffed I want to get it recovered or get a new one . So does any one know where to buy these new? Or where to get them recovered in Victoria ??? ThAnks

Hey dude I used a rt104 corona diff just moved the leaf mounts in a bit and re welded them . Then need the splice a tailsharft together corona and corolla . It's the same As a celica diff and you can leave your 13 wheels on just might need to space front wheels to match the rear track ,