1JZKe55

Hey guy's i managed to finish welding in the boot floor tonight didn't come up too bad..! oh and i shouldn't have left it so long in bare metal bloody surface rust....! :lol:

yes it is possable to set a sc14 as a draw through set up have done it before made about 65rwkw on 7psi max intake temp gets to high to run any more. With intercooling/efi and 14psi made 106rwkw and 436nm out of this set up :)

hey the easiest way to is too use the standard pulley on the supercharger and turn one up that will bolt up to the harmonic balancer so you can get the right drive ratio

the tubs are tacked into place just gotta finish welding them in yay might have it ready for paint & panel by early feb

ke70 steering in ke55 :hmm:

yeah no prob he's coming back up mid week so i'll see what i can do

hey just a quick update on the supercharged rolla finally got it back from the dyno shop only took them 3weeks to do 4 hours work useless #$%@&* but it's up and cruising round. Its a bit dissapointing only made 90kw and we have lost 70nm but were down on boost too so we might make another pulley and have another crack at it . but by god does it get up and go when that s/c clicks in its like 125hp shot of nos

yeah its been on the back burner the last couple months had a couple other projects to do but there finished now so its back to the 1j gonna try and get it ready for panel and paint by mid January if all go's well

well the car is off to the dyno shop should have it back wednesday next week :P

I build my own personal motors but never really built 1 for some 1 else

yeah i made everything apart from the manifold which was a left over part it only took about 8 days work to make everything and put it together

yeah i'm keen as to see what its got an old set up made 90kw and 377nm on 8-10psi at 6500 and this time were running 20psi at 6500 with a better set up so should make about a 110kw and well over 400nm :D

Well its in the car and just about ready for its first dyno guys should be interesting :D

Hey thanks for the offer but already got fuel and ignition maps. yeah its a v4. something can't remember off the top of my head Neil knows what it is yeah the injectors are a little on the big side but so is the bosh 044 :D

hey guys just a little something that neil and i knocked up this week should be a killer little set up :lolcry:

hey umm lets just i'm glad i can do all the fabrication work so its just parts cos you would be looking at 30g+ for some 1 to build something like this!! if you found some 1 who could / would build it

managed to do a couple hour work on it in the last 2 days starting to look like a car again

nearly there just a bit of welding to go

Yeah the photos are bit average bein using the camera on my phone it takes shit photos lol

hey The best thing to do then is bring the front roll bars up through the dash that way you can keep them as close to the A pillar the center hoop your all ways gonna see that in a ke20 same with the rear bars all you can do is keep them close as possable to the pillars. price wise looking about $1650

:wink: