sam k Posted November 12, 2007 Report Posted November 12, 2007 hey i have a 2TG and I'm currently in the proces of taking the head of the car. i have taken the cams out and have un done all the head bolts but it still wont come off. there are to bolts in between the plug holes but I'm not sure if un doing these will remove the head. Does any one know? thanks sam Quote
styler Posted November 13, 2007 Report Posted November 13, 2007 the head gasket will be sticky, you have to lever it off on an appropriate section with a pry bar or pinch bar etc Quote
KE30_KE35_KE55 Posted November 13, 2007 Report Posted November 13, 2007 hey i have a 2TG and I'm currently in the proces of taking the head of the car.i have taken the cams out and have un done all the head bolts but it still wont come off. there are to bolts in between the plug holes but I'm not sure if un doing these will remove the head. Does any one know? thanks sam you could put the plugs back in and crank it over let the cylinder compression do the hard work for you. Quote
sam k Posted November 14, 2007 Author Report Posted November 14, 2007 its all good now guys got it off just a bit of leverage did the trick, and when it came there was a broken valve sitting on the top of the piston :lolcry: thanks for the help anyway. Quote
TRD ke70 Posted November 14, 2007 Report Posted November 14, 2007 is there any bolts around the front of the engine, by the timing cover where it meets the cylinder head. Quote
love ke70 Posted November 14, 2007 Report Posted November 14, 2007 hit it with a hammer! :lolcry: Quote
Calam05 Posted December 9, 2007 Report Posted December 9, 2007 thread reseructed for that post alone ^^^^^^^^^^ haha the bigger the problem the bigger tha hammer Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.