August 29, 200818 yr comment_271182 "rolla skid video" unless this was done in controlled conditions and on a race track you are an idiot :cool: nothing but a hoon :sob: and not a person that buys a car to admire it. this is what i feel like doing to people like you :hmm: you should not be on the road there ya go changed Edited September 3, 200818 yr by roladude Report
August 29, 200818 yr comment_271199 Agreed. Keep the antics OFF the streets Just don't start complaining when you get the car impounded or write it off. And last but not least.. It's a KE, Their NOT built for burnouts :sob: Report
September 2, 200818 yr Author comment_271955 Updates: ok guys first of all skid video has been removed sorry if i offended anyone with that and roladude if u could please remove the link out of ur post thanks. next u no those holes behind the seats in the panelvans i decided to put subs in them. ive seen a few people talkin about doin this but haavent seen any pics yet anyway ill post up my pics tonight. Report
September 2, 200818 yr comment_271957 next u no those holes behind the seats in the panelvans i decided to put subs in them. ive seen a few people talkin about doin this but haavent seen any pics yet anyway ill post up my pics tonight. Hey mate, DON'T put your subs in the holes where you're talking about, UNLESS you can make a half decent moulded fibreglass enclosure for them. But even if you did this I reckon you'd be pushing it for the capacity you would need for a 10" sub. Reverse mounting them might bump it up to sufficient voluum but this would wreck the practically of the wagon. There's sometimes a lot to be said for a removable, pre-fab, correct voluum sub box. No sub box = "free air subs" = "air pmps" = don't bother!!!!! :P Report
September 2, 200818 yr Author comment_271995 Hey mate, DON'T put your subs in the holes where you're talking about, UNLESS you can make a half decent moulded fibreglass enclosure for them. But even if you did this I reckon you'd be pushing it for the capacity you would need for a 10" sub. Reverse mounting them might bump it up to sufficient voluum but this would wreck the practically of the wagon.There's sometimes a lot to be said for a removable, pre-fab, correct voluum sub box. No sub box = "free air subs" = "air pmps" = don't bother!!!!! :P yeah mate i no its a horrible box design but i wasnt overly fussed i just sealed the box with spandy foam did some rough calculations and i have about .38 cubic metres per sub so its not to bad Report
September 2, 200818 yr comment_272060 When i had my 36 van 12 or so years ago i stuck some 8" subs in the holes (8 were a hot thing back then) and they actually sounded quite good. Report
September 2, 200818 yr comment_272089 Damn, That's HOT!!!, got myself a 82 van, urs is 10x better Report
September 2, 200818 yr Author comment_272176 update pics not very good night shots on the phone but u get the idea its a black carpeted faceplate Edited September 2, 200818 yr by duggy Report
September 3, 200818 yr comment_272362 there ya go ive fixed my post different idea on the subs are they behind the seat on the floor :P i have not looked in a panelvan before except a 120y datto the 120y's have a spot for back seats but have a panel bolted on top is the corolla the same Report
September 3, 200818 yr Author comment_272443 there ya go ive fixed my post different idea on the subs are they behind the seat on the floor :P i have not looked in a panelvan before except a 120y datto the 120y's have a spot for back seats but have a panel bolted on top is the corolla the same yeah just 8 inch holes in the back but mine didnt have a panel over them dunno if they came with one Report
September 4, 200818 yr Author comment_272691 update again picked up some new goodies tonight got a custom stainless highmount manifold and a oil cooler. oil cooler only cost me $50 bucks cause its got a couple of dented fins :) pics: oil cooler damage manifold Report
September 5, 200818 yr Author comment_272784 ok guys who can pick the problem with the manifold i worked this out about 10 mins after posting last night Report
September 5, 200818 yr comment_272785 Firstly hopefully you didnt pay too much for the "custom" manifold as its straight off ebay. Secondly its for a 20V 4age. Ninja edit too slow: Thirdly its a low mount and not a high mount. :) Edited September 5, 200818 yr by cuzzo Report
September 5, 200818 yr Author comment_272786 its a low mount not high mount dnt you mean and aint the ebay ones set up for an external gate? Report
September 5, 200818 yr comment_272787 Not all of them are external gated. Did i get the 20v part right? Correct low mount. Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now