Got a Photo of the Micro Tech with Ignition enhancer & Fuel Regulator! :y:

 

Edited October 1, 200817 yr by 4agzerola

100% excatly what i'm in the process of doing atm mate

its wicked awsorm

 

what power are you aiming for

 

You using Front Mount intercooler?

 

If so have you got photo's of your front end setup?

 

I have to make the Brackets for the radiator & cooler & Cut the holes for the Front Mount Piping before it get painted in 2 weeks time.

You using Front Mount intercooler?

 

If so have you got photo's of your front end setup?

 

I have to make the Brackets for the radiator & cooler & Cut the holes for the Front Mount Piping before it get painted in 2 weeks time.

 

and where you actually mount the cooler itself!

Edited October 2, 200817 yr by The_Lab

and where you actually mount the cooler itself!

 

Hey Lab ended up cutting out the brackets on the head light frame's last night that we looked at! So the piping almost clears it now. Have to get a Whole Saw to cut them holes A.S.A.P Really need to get all these little things done before she gets painted.

 

 

Need to find another Front Stone Tray. The one I'm using was bent and all messed up, so i cut it up a bit more for a template for when we get the new one.

 

The 90 Degree Mandrel Bending Piping I'm using may not clear the head light frame :hmm: Just that bit to long, need to find some thing shorter.

 

 

So i found these! Nice colour selections aswell :lol: I think they will look the part and give us WAY more clearance :y:

 

 

Here's the link has pricing list. "Turbo Hoses R&R"

Edited October 3, 200817 yr by 4agzerola

lookin good mate, keep those pics coming.

I'm at the same stage with my project ('cooler fitting)...

are you running an oil cooler?

 

Cheers,

Mark M

Its my little brothers car he has to buy all the bits. If not ill get it @ Xmas for him lolz

 

Yeah should be i found these kits on eBay that are cheap! don't need any thing to big as its only a 1.6L "Oil Cooler Kit"

 

Check out the Size of the Big Ass Oil Cooler on My Gemini!

 

Edited October 3, 200817 yr by 4agzerola

make sure you use an oil cooler which has thermostat control otherwise your oil may end up being too cool on the street.

make sure you use an oil cooler which has thermostat control otherwise your oil may end up being too cool on the street.

 

 

Very Good Point!

 

The Oiler cooler i got on my Gem is a 30 rom you think its to big?

 

Its a 13b Turbz Rota, they run hot & use alot of oil.

 

Ill guess ill find out ether way, I'm pretty sure it has a thermostat but!

Pretty sure they'll be one in the motor as its a factory thing.

All rota's run quite large oil coolers. :hmm: h

Hey Lab ended up cutting out the brackets on the head light frame's last night that we looked at! So the piping almost clears it now. Have to get a Whole Saw to cut them holes A.S.A.P Really need to get all these little things done before she gets painted.

 

 

Need to find another Front Stone Tray. The one I'm using was bent and all messed up, so i cut it up a bit more for a template for when we get the new one.

 

The 90 Degree Mandrel Bending Piping I'm using may not clear the head light frame :hmm: Just that bit to long, need to find some thing shorter.

 

 

So i found these! Nice colour selections aswell :D I think they will look the part and give us WAY more clearance :y:

 

 

Here's the link has pricing list. "Turbo Hoses R&R"

 

yea i was going to come over today but, again had no transport so missed out. Kind of happy you have looked into the piping issue more tho :lol:

Got a few more pics again today. Cut the head light frame out and got a wholesaw to cut the cooler piping holes.

 

Just waiting for Kra55 to buy the Silicon 90 degree bents some time this week.

 

The peace i had to cut out for piping clearance.

 

Going to be a tight fit.

 

Still need to find another stone tray.

Edited October 4, 200817 yr by 4agzerola

Dude save your self some time and effort and just go get some 90 degree silicon bends.

Cut out around where the bends go. Glue some vaccum hose split down one side on the cut metal and enjoy.

Thats the only way it will work, Is with them Silicons Bends.

 

I made the Intercooler Brackets todays will paint them tomorrow.

 

Not the best picture, But here ya go.

 

Edited October 5, 200817 yr by 4agzerola

Sorry dude i saw the bends then i saw the straights and assumed you changed your mind.

 

Carry on. :)

LoLz Yes Sir! :)

 

All good, should have the brackets for the radiator & the holes cut for the piping finished by this weekend.

 

Iv been sick :) the last 2 weeks so i haven't really done much on the car.