August 30, 200917 yr comment_369915 Has anyone had any problems fitting a T40 gearbox to a 5K corolla motor.. The gearbox wont go in the last ten millimeters Report
August 30, 200917 yr comment_369923 sounds like you don't have the spacer that goes behind the engine? tried spinning the output shaft in 1st gear while pushing it in? Report
August 30, 200917 yr comment_369951 Has anyone had any problems fitting a T40 gearbox to a 5K corolla motor.. The gearbox wont go in the last ten millimeters Are we to assume you have the K-T adaptor too? what engine did the T40 come off? Report
August 30, 200917 yr Author comment_369984 sounds like you don't have the spacer that goes behind the engine? tried spinning the output shaft in 1st gear while pushing it in? have the spacer fitted . in gear and spun output shaft it goes to dowles wont go any further. its like input shaft is touching the spigot bearing Report
August 30, 200917 yr Author comment_369986 Are we to assume you have the K-T adaptor too? what engine did the T40 come off? t-40 came off 5k carina have k-t bellhousing hyd clutch Report
August 30, 200917 yr Author comment_369992 t-40 came off 5k carina have k-t bellhousing hyd clutch gearbox specs are 21spline input 22 spline output gear stick at back of extension housing Report
August 30, 200917 yr comment_370016 Id put it down to hitting the spigot bearing. Have you got vernier calipers? check the size of the gearbox spigot and the internal diameter of the bearing. Wouldnt have a carina spigot bearing available? Report
August 31, 200917 yr Author comment_370284 Id put it down to hitting the spigot bearing. Have you got vernier calipers? check the size of the gearbox spigot and the internal diameter of the bearing. Wouldnt have a carina spigot bearing available? checked spigot and shaft sizes all seem to be the same going to get a 2tg spigot thanks to everybody for your help Report
August 31, 200917 yr comment_370354 checked spigot and shaft sizes all seem to be the same going to get a 2tg spigot thanks to everybody for your help Spigot bearing is - 6001zz t and k boxes fit the same spigot bearings .Good to renew anyway. Especially if its been poked by the inputshaft. Sounds to me like clutch isn`t centered and ingoing shaft is hitting spigot bearing due beeing pushed to the side by clutch Report
September 1, 200917 yr Author comment_370546 Spigot bearing is - 6001zz t and k boxes fit the same spigot bearings .Good to renew anyway. Especially if its been poked by the inputshaft.Sounds to me like clutch isn`t centered and ingoing shaft is hitting spigot bearing due beeing pushed to the side by clutch got the right spigot was new when motor fitted . took off pressure plate and clutch plate box went straight in . ithink your right tojo2. will realigh clutch thanks Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now