May 21, 201016 yr comment_439052 So i didn't get that F@#king strut top off cause i was busy doing my mates brakes last week, so hopefull tomoz i'll get them off then back to stock height...4x4 spec lol :D during the week my mind has been ticking away about future engine conversions...i know 4age is what i stated i wanted to put in, but i was thinking something a bit more different...and stupid lol i've been considering an rb20...anyone does this engine swap? if so, how much work am i gonna be up for... Lots and lots. EDIT: 100th post woo! Edited May 21, 201016 yr by xmoht Report
May 21, 201016 yr Author comment_439054 am i going to need to cut into the firewall to fit it in, or just the tunnel to fit the g/box or both? Report
May 21, 201016 yr Author comment_439075 cheers mate...found it, i think the right one your talking about he didn't have much info on the firwall and tunnel and shit :D Report
May 21, 201016 yr comment_439084 Hey GL on the build and everything, i am also painting the interior and couldnt figure out how to get the dashboard off, have you taken yours off yet? Report
May 22, 201016 yr Author comment_439362 lol i was meant to a while ago before i took a hiatus and never did, but it should be off very soon and i'll let ya know...if you get it off let me know :D well i FINALLY managed to get the strut top off after much difficulty due to the insert spinning :( :no: :hmm: i then ran into another problem, when i went to put the stock springs in, i found i needed to compress them , and after many trials i gave in and went a spring compressor which made my life just that bit easier rofl :( ;) ;) So now it is back to stock height :P PICS ARE SOON TO COME Report
May 22, 201016 yr comment_439375 sorry i can't help with more photos at the moment mate but if you want to go the rb20 i will help out where i can. if you want my opinon i would go a ca18det i think this is one of the best all round combos for a turbo ke70. if you are after losts of power go an sr or rb but a good street track combo is the ca18 i put one in a 1200 ute for a mate and it was faster than my rb 70 and they are good on fuel. Report
May 23, 201016 yr comment_439452 lol i was meant to a while ago before i took a hiatus and never did, but it should be off very soon and i'll let ya know...if you get it off let me know :D I just took my dashboard off finally lol, there are 4 nuts with washers on them they are a brass colour, 2 are above the glovebox (have to take the glove box out to get to it) and the other 2 are behind the stock ke70 dash i had to take the dash out to get to them aswel. Report
May 24, 201016 yr Author comment_439815 hmmm if you got an rb20 in your car and recommending something else i just might have to seriously consider... PICS UP LATER TONIGHT Report
May 25, 201016 yr comment_440180 hmmm if you got an rb20 in your car and recommending something else i just might have to seriously consider... PICS UP LATER TONIGHT the rb is very heavy i only want to go in a straight line so the ca will handle alot better... Report
May 25, 201016 yr Author comment_440183 the rb is very heavy i only want to go in a straight line so the ca will handle alot better... ahhh i shall take that into VERY high consideration :happy: :yes: ever so slowly leaning towards the ca now, doen some reading up on it too and it's looking ever so tempting Report
June 7, 201016 yr Author comment_443051 some update in picture form :) Edited June 7, 201016 yr by kose Report
February 22, 201115 yr Author comment_504893 Rightio, after almost a year of hiding under a rock i'm back into it...thank god! :) the car has moved home again, three hours away from where i live, but i now i have my own garage in which to work on it. Within an hour of it being offloaded from the trailer i started working on it lol stripping it down and so forth so far i have removed: -front panels -doors -boot -seats -plus whatever the hell else i could find to pull out went over the entire car to find all of the rust spots, found quite a few unfortunately :( some of which are quite extensive, so lots of work to fix all of them up...yayyyy lol got the old man in on the car now so having that extra pair of hands is always helpful :) after taking the car apart, we became quite suspicious of the rear divers side, thinking it had been in a bit of a bung. i couldn't find anything wrong with the chasis rails (phew) but we went about taking some of the paint off to find nearly the entire section around the fuel cap was full of bog joys for all "WHY DON'T YOU JUST GET RID OF THIS F*#KING THING!?!?!" was the response i got from my father when we found this out pfft, i wouldn't have a bar of that, and after many arguments and debates i got him to side with me, and that we'll try and get it back to as close to prestine condition as we can. Much things have been fully decided: Eninge- 4AGE, after my father trying to convince me to put a rotary in it haha front suspension - Coilovers Rear suspension - still undecided colour - red Interior - black Wheels - something dishy with good offset The timeline we have set to have the entire car finished by is the end of 2012 (i know, a long time but i have to save for an overseas trip at the end of the year) Quite a long update and blab, but f*#k it feels good to be able to say that I'm back working on the rolla :D Edited February 22, 201115 yr by kose Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now