Twinky Posted July 4, 2012 Report Posted July 4, 2012 I know this is an old thread but anyway.... My 4k alternator has the coils mounted on the front housing whereas the VL has the coils sitting in the rear housing. Also I can not un bolt the god damn centre shaft because the bolt heads are on the inside of the housing. WTF? It's like the shaft was pressed together after it was bolted in. (on the 4k) Might try to drill the bolts out. Had no problems pulling apart the VL alternator. Quote
Twinky Posted July 4, 2012 Report Posted July 4, 2012 It's clicked now..... You didn't remove the bearing carrier. Quote
Evan G Posted July 4, 2012 Author Report Posted July 4, 2012 if i remember correctly you just tap the rotor out from the front bearing? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.