March 18, 201214 yr Author comment_591224 thanks mate still new to this stuff, slowly getting thear wos tald the car larst wos running about 2 years ago,tomorrow will be a full day on it Report
April 10, 201214 yr Author comment_596553 haven't had much time,i will fit carpet back in as i fitted a new loom and removed and refitted the dash,wos fun job lol. now its cooler i can get stuck into it more often have to change the linkage abit and make somethink up for the throttle cable but shouldn't be too hard. will post more pics somtime this week. Report
June 22, 201214 yr Author comment_611650 wos a putty i got oil,petrol,and will hold presher upto 1300psi resistant. been using it for years on diffrent things holds up relly well. Report
June 23, 201214 yr comment_611742 I would get soft mounts and ditch the phenolic spacers, its much better with the soft mounts for sealing and vibration, redline and mislab make them. Report
June 23, 201214 yr comment_611743 Buy a throttle linkage kit, good ones allow the correct travel for the pedal/carb by using a ratio lever and also have strong independant return spring, don't use the butterfly return spring on its own. Report
June 23, 201214 yr comment_611766 wos a putty i got oil,petrol,and will hold presher upto 1300psi resistant. been using it for years on diffrent things holds up relly well. wouldnt be able to get the name of it would you? Report
June 23, 201214 yr comment_611770 Yeah+1 for a name, I have a fuel hole i have capped with a heater cap but need a more permenant solution for as fuel + rubber = fail Report
June 23, 201214 yr Author comment_611832 yeah i have a full link set up with wheels and the rod and stuff sorted out. will post more pics but i have the car for sale on ebay and on hire.um the putty i used its like liquid stell you cut abit off and need it with your fingers and it gets tacky and starts to turn hard. i lost the tube i used so the name i can not remember!! i have even used it to seal up a cracked mag wheel still holds today after 6 munths.on the inside off the mag but yeah look at your hard wear shops few diffrent names long as it can handle heat petrol oil and presher shood be fine? Report
June 23, 201214 yr Author comment_611835 found it name is Shelleys auto fix knead it multipurpose repair system wos somthink like $20 for a long stick at bunnigs wear house in aus. Report
June 23, 201214 yr comment_611838 jb weld? please improve your gramma Doug, That took me a couple times to read...... Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now