where can i get a mild cam,inlet manifold for a 32/36 weber and extractors for an AE71 4ac,relatively cheap?

The only extractors Ive ever seen for a 4ac were on american ebay.

I saw 4ac extractors on ebay only about 2 to 3 weeks ago, they were from a company in Victoria called Hurricane.

They can be contacted at:

performancexhaust.com.au or 03)98704977

 

The ones they advertised were for FWD, but you never know your luck, they may have RWD ones as well.

They were about $300 + postage

www.paridiseracing.com

thanks guys.i found some extractors at a wreckers for $100.still chasing an inlet manifold and cam.

Isn't the cam just a "send of & grind it" job from one of the half a dozen cam grinders around?

 

Do you need a specialist inlet or is it like the K motor with just an adapter plate fitted to the stock one?? If you're up for a new manifold you might as well look at a single DCOE as an option too.

ive recently done a head a cam package for a 4ac for $400. includes a 210 duration @ 50 thou cam. (mild) can't go any bigger than that with a regrind. 40 thou taken off the head. port matched and a valve lap/new stem seals

 

ran a 16.7 down the 1/4. ( i think(

i could put an adapter on the stock inlet for my 32/36 weber,but i'd prefer a better inlet manifold for it.Evan,where you at?that sounds perfect.can you get/do me one?

youll find adapter plates on ebay.

 

I'm located in melbourne. if you want it done i need the head (complete) and intake manifold.

 

pm me.

 

it ran 17.58,