hey guys

 

i just started striping one of my 3t's and the bores don't look to great defiantly needs a re-bore

 

I'm just after standard compression oversize pistons and i know both the 3t and 2t have 85mm bores standard

 

so does this mean they both take the same pistons?

 

theres alot of "2t" pistons available on ebay and not many "3t"

 

thats the reason why I'm asking..

 

thanks in advance :)

2T-C bore 85 stroke 70

3T-C bore 85 stroke 78

 

ebay usa maybe?

 

i can get them thru my engine builder if you need? ill give you a buzz next time I'm down

No the pin height is way different to compensate for the stroke of the crank,

2t pistons on 3tc would poke out the bores and smash the head if installed.

1) 2t crank + 2t pistons

2) 3t crank + 3t pistons

No the pin height is way different to compensate for the stroke of the crank,

2t pistons on 3tc would poke out the bores and smash the head if installed.

Fark, 3t pistons it is then..

 

Thanks for the info man :)

"rockauto " is cheap and got most of 3T parts

"rockauto " is cheap and got most of 3T parts

 

thanks tojo u been a massive help with all my problems :)