May 20, 201214 yr comment_605006 So i have a ae71 tacho dash, i'm going to put it in my ke70 panel van. but none of the plugs line up, I've found a guide on toymod http://www.toymods.org.au/forums/tech-conversions/568-ke70-panel-van-dash.html still kinda can't get my head around it. any help would be great, i still have the 4k in my pano as well. thanks chris Report
May 20, 201214 yr comment_605027 Pretty sure all the wiring/plugs is totally different. Plugs are the same, wiring is different. All you do, pull your cluster out, then copy the wiring diagram that's in that Toymods thread, you need to change it so your wires are the same as ADM KE70, it's fairly straight forward, the wires just unclip and you clip them into the new plug position. Did it in my panelvan but i couldn't get the factory water temp gauge to work which isn't a big deal. Should only take a hours Report
May 20, 201214 yr comment_605074 The tacho gets it's signal from the negative terminal on the coil I think. Report
May 20, 201214 yr Author comment_605075 Well it should do, but I'm guessing I have to put that one in wouldn't i? Report
May 21, 201214 yr comment_605260 I was literally out driving and remembered that, run a wire from negative part of coil to where the tacho signal is in the plug. Report
May 21, 201214 yr Author comment_605263 yea i thought you had to as the panel van doesn't have the tacho signal. I guess i just have to trace back from the tacho to what plug it is or do you remember? Report
May 21, 201214 yr comment_605265 its a black wire in the plug closest to the indicator side http://www.rollaclub.com/faq/index.php?title=Installing_an_Aftermarket_Tacho_Into_KE70 Report
May 21, 201214 yr Author comment_605275 thanks for the help guys going to get on it tomorrow hopefully all goes well. Report
May 23, 201214 yr Author comment_605625 did it today every thing works expect dash lights but ill fix that. sadly i shorted out the clock some how so got to find another one or fix it depending on what blow. that guide worked great. there where just couple wire that weren't the same. tacho works I'm going to check it some time soon to see if its accurate Report
June 25, 201214 yr Author comment_612168 okay hit a problem, i toke it for a drive today and when i hit about 5 grand the tacho just drops down to 0. does any one know what would cause this? Report
May 11, 201313 yr comment_655772 Does anyone know if there is another place to find the toymods guide? Their forums seem to be down... Report
May 11, 201313 yr comment_655827 You can try installing a 1kohm resistor in the tacho wire and see if that helps needle stability. Report
May 14, 201313 yr comment_656144 Site is back up - interwebz won't allow me to download the file. If someone has a copy and could email it to me that would be great... Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now