tas_ae71 Posted August 8, 2006 Report Posted August 8, 2006 (edited) heres my ke70 its a 1984, S model (povest spec) rust in both rear archs, rust in one spot in boot. will fix when i got around to it, and flare them... broken bumper lenz.. will replace it some time... mods: currently i have a reclinable drivers bucket as the stock one had the arse fallen out of it ;) also have a 3 3/4" tacho over the ghey clock geniune single layer nitto tape eye lids 8mm spacers on the front... parts i got that is going in: ma61 rims.. just need some desent 2nd hand tyres.. 4ac and t-50 layin on my shed floor up coming: 4ac conversion organic plate exedy cut springs ae86 struts/adm brakes ma61 rims.. get them on the dam car!!! better steering wheel thinking about a quick respray when i fix the rust flared gards fiberglass bonnet sprinter bumpers spirit wing other bits and peices.. better springs and shocks too but they cost money Edited May 5, 2008 by tas_ae71 Quote
tas_ae71 Posted August 8, 2006 Author Report Posted August 8, 2006 will post more pics tomorrow Quote
tas_ae71 Posted August 9, 2006 Author Report Posted August 9, 2006 (edited) heres the pics promiced Edited August 9, 2006 by tas_ae71 Quote
r3s Posted August 9, 2006 Report Posted August 9, 2006 aaah trusty old spacers on the front, i need the same spacers for my ROH 15 inch mags. looking good ;) Andrew Quote
tas_ae71 Posted August 12, 2006 Author Report Posted August 12, 2006 (edited) i belive you can buy some of these small spacers off ebay for $25-$30 also have some shitty hard rubber on the rims now, can't wait to be able to affor some yokahama soft compounds or semi slicks.. heh heh Edited August 12, 2006 by tas_ae71 Quote
Brendo Posted August 12, 2006 Report Posted August 12, 2006 afford them? i got 2 yoki soft compounds for 25 each lol I'm givin em to justin cause they are on his rims anyway lol Quote
mitch13 Posted August 12, 2006 Report Posted August 12, 2006 Love the TRD drawn in the dust on the side (first pic of the car). Should be a nice little car when you finish it. Quote
tas_ae71 Posted August 20, 2006 Author Report Posted August 20, 2006 i got 2 yoki soft compounds for 25 each lol well brendo if any good tyres for 14"s come in let us know :( mich 13: hopefully got an exedy single plate clutch, 80bucks, the bloke who i brought it off of said he had it had only don't 2,000km behind a 4ac, just street driving, no silly business or nothing.. Quote
driftke70 Posted August 22, 2006 Report Posted August 22, 2006 this might sound dodgey mc dodge to you guys, but if your going to use spacers like that, was the problem with some washers? Quote
Paul Posted August 22, 2006 Report Posted August 22, 2006 lol that does sound dodgy, really dodgy Quote
tas_ae71 Posted August 31, 2006 Author Report Posted August 31, 2006 these spacers don't seem dodgy, i have put them on the back now, i also got the longer type wheel nut that go into the rim so they have more thread than stock ones.. might see if i can make up some wider ones, could use some slightly bigger ones on the rear. the front is perfect without spacers. how fully (if i can be bothered to get off my arse) i will be cutting the springs this weekend. with the ma61's it made it slightly higher so it looks more like a monster truck... Quote
Des Posted September 2, 2006 Report Posted September 2, 2006 (edited) I thought all wheel spacers were illegal ? Edited September 2, 2006 by too quick Quote
tas_ae71 Posted September 26, 2006 Author Report Posted September 26, 2006 sell as stock, no ma61's etc Quote
Des Posted September 26, 2006 Report Posted September 26, 2006 do you have the engine mounting brackets from you 4ac? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.