cheers man! haha i shoulda linked ya to toymods.. only like 6 pages then.. lol

 

so here are the braces ryan made for my ass!! lol

he love it

just a mock up!

these have plates that go on the other side of the rail. and high tensile 1/2" bolts.

 

 

also i got him to reset my oil pump spring essentially the same thing as shimming. so there'll be plenty of pressure at 9000rpm.

Edited August 28, 200917 yr by greenmac80

Glad to see/hear they fit in nice an tight.

 

Got some more plans for as far as bracing goes. If it works i could possibly do something bolt in for ke30/55's :lol:

ok been ages but i've doing things here and there...

 

well i purchased a full 20v set of ARP head bolts for a measly sum of $215!

 

also using this thread here..... http://www.toymods.net/forums/showthread.php?t=41688

i've made myself and electronic speedo sender.

 

also to keep with the theme of my car and smoothing things out a bit.... i've decided to shave the vents on my bonnet...

i've done more work since these pictures but man.... it isn't easy to get straight!

 

 

also... i've jst moved into my own home...

so this is my rollas new home!! enclosed.. YAY!!!!!

 

 

and my own shed!!!

 

in the picture above you can see steelies!!

these are holden VE 16" rims! i scored 6 of these.

the plan is to use a SAAB 16" space saver centre and get them put into these bands.

also i got 6 so i can get 2 of them widened!

 

cheers!

lucky jason barrie and wayne david were there to lift it :)

don't forget Ryan too.

WOW this car has come real far since I checked this thread out. Well done!! Can't wait to see more ay!

don't forget Ryan too.

 

huh who?

oh the guy with profanities writen on his tray ahahha

great to see some progress man, and agreed, never easy to get straight!!! Its just about persistence i think.

 

With the steelies, you can buy outer rims just by themselves, they are available in all widths, 4, 7, 8 in 15s for under $60 each, just saves a heap of hassel cutting them out and all that. Not sure about 16s though. I can give you the number of the place here in brisbane if you wanted to ring and ask.

great to see some progress man, and agreed, never easy to get straight!!! Its just about persistence i think.

 

With the steelies, you can buy outer rims just by themselves, they are available in all widths, 4, 7, 8 in 15s for under $60 each, just saves a heap of hassel cutting them out and all that. Not sure about 16s though. I can give you the number of the place here in brisbane if you wanted to ring and ask.

 

Are you cereal?

 

I went to Adelaide Wheel and rim and they wouldnt let you buy just the bands.

 

PM'd :)

The Startings of an all stainless Plenum for this beast of a thing...

 

 

Unpolished at this stage but will chuck it on the lathe at work and give it a wicked shine

Then parting and facing it off for sqaure ends.

Get some flat stainless sheet for the end caps.

Machine the 2.5" hole for the inlet in one cap.

Source some 2" stainless for the runners, flare the end and weld it up.

Oh, and before any welding takes place, 1 piece flange for the throttle bodies will be laser cut. (hopefully i can fine a lump of stainless that wont put me into debt for 200yrs)

 

CHEERS

Ryan

Well here is what took my time up this wkend.

pretty good result but had a few dramas..

 

 

and.....

 

sick! i love it haha :y:

How'd Ben go with the crap in the clear and the bubbles?

Saweet colour mate!

Edited December 15, 200916 yr by Funking-Awesome

ryan... it all good a cut back and polish and she'll be sweet.

 

Funking-awesome the colour is the VE colour called 'Crunch'