June 19, 200818 yr comment_254552 I have been looking around this board for a few days now but i cannot find the information i want. Tomorrow i will pick up twe KE35's, one will be the "good" car, the other wil be the donor car. First thing that must be done is lowering the car, but i cannot find what is the best way for lowering the front. I already figured out the rear, but the front... How do you guys do that? What struts to use, other dampers, ready to use kits available? thanks, Eric Report
June 20, 200818 yr comment_254592 Welcome, this may help http://www.rollaclub.com/board/index.php?showtopic=20447 Report
June 20, 200818 yr comment_254633 Try getting some lower springs on the front. and some new inserts for the shocks. Make sure your spring and shock rate are matched. Report
June 20, 200818 yr Author comment_254648 thanks, i already found the topic from the Belgium guy. I will look for some shortstroke AE86 dampers and shorten my damperhousing with 4cm. I was told ae92 GTi rear dampers will fit too :lolcry: Report
June 21, 200818 yr comment_254904 ok whats your budget to start off with? because it can range from using an angle grinder or buying full aftermarket coilovers, also what is the car used for? Edited June 21, 200818 yr by anastasios Report
June 21, 200818 yr comment_254916 ok whats your budget to start off with? because it can range from using an angle grinder Ryobi Tuned Suspension FTW..... Report
June 21, 200818 yr Author comment_254922 Well, the car wil just be a daily driver since i am completely rebuilding a TE71 with 4age 20V and that is were my money is going. So, i don't want to spend the world on the KE. I do want to be sure that it is save to drive and has a little bit of comfort. No cutting springs etc. The damper thing is figured out, shorter ae86 KYB dampers wil fit my damper housings if i shorten the housings 4 cm. Only thing i need to find is a set of matching springs like these : http://cgi.ebay.com/ebaymotors/88-91-NISSA...sspagenameZWDVW The problem is the 240sx ones are a little to wide to fit the KE damper housing and i can't find a set of these for the AE86. Report
July 6, 200818 yr Author comment_258834 Just ordered a set of weld on coilovers and a set of rca's from T3, already have my whiteline loweringblocks at home. Rear dampers kan be changed for something better too? Report
July 7, 200818 yr Author comment_258952 we don't have commodore wagons or monaro's over here :D Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now