hi guys i have a ke70 that i am going to MOD

but not sure what i should do to it

i don't want to spend heaps of money

So far i have extrators and 2 1/4 in exhaust

and a webber downdraft on it

and its on its guts as you can see from pics

i now have a set of twin su's on manifold that i am going to put on it

 

i want to get a cam gring not sure what is best to do???

 

also should i shave the head and by how much???

 

i want to change over to electronic ingnition but can't find one

 

if anyone has any sugestions on what to do would be great thank you

 

i will keep updating this as i progress with the car

 

cheers corey

Edited October 8, 201016 yr by KE70PWR

Nice K-Sev Mate. :P

 

I'd keep the Granny-Spec Sleeper Look that you have in it now.

 

I like the idea of the Twin Su's on the 4K. It would go and sound like a Beast.

 

All the best with it mate.

 

Josh :bash:

cheers mate yeah want to keep the outside as a sleeper

just want to do performance mods to it make a 4k weapon

hi mate nice ke , y did u go 2 1/2 inch on the exhaust 2 was max i went and my motor was pretty hot i.e big grind tighe cam, port polish ect , as for electric ignition go on to trademe.com plenty on there pretty cheap, get some nice period correct wheels then your on a win , like my ssr's witch r for sale or mungi mods has a lot of nice refurbished wheels for sale

That's a damm nice car! Don't f@$k it up with matt black paint or ripping out the interior or anything stupid.

 

You'd need to decide what you want out of the car first... daily driver, weekend warrior, serious grunt but hopeless in traffic...

 

That will set the cam you get and the compression. Plenty on here about it, 280deg cam and 20thou off the head does most people. ...and yeah, that's a big exhaust! What's the muffler setup and the noise like?

 

Now someone was selling a 'new' electronic dizzy on here a week or so back, a KP61 I think it was. Same dizzy anyway, one of the site sponsors. If not, you can get reco ones from the USA for $100.

did anyone else notice his egr on his stock exhaust manifold?

i do know , good eyes evan lol

yeah the phot is from before i put the extractors on

the exhaust might be 2in i not sure will measure one day i got it second hand

yeah i not changing the interior is imaculate inside

i want something with some grunt but will still need to drive in traffic

 

where abouts should i go to get one of those dissy from the us

Here!-

 

http://www.rollaclub.com/board/index.php?showtopic=41870

electronic dissy ordered put in this weekend and take updated pics

works great

just got to get the timing right now

Edited July 17, 201016 yr by KE70PWR

That's a damm nice car! Don't f@$k it up with matt black paint or ripping out the interior or anything stupid.

 

Couldn't agree more !

 

Decide what your usage will be and tailor your mods to this. That way you will have a usable and sensible package.

Have you read the FAQ article on how to build a tough k motor ? That's a pretty good starting point. Link HERE

 

Cheers,

Dougal

Corey, Rob (rob83ke70) has just taken his SUs off to overhaul them and fitted a Weber.

 

You two should compare notes about them- He's also got a cam fitted and a free-flow exhaust. He said the Weber gave more instant grunt, which is the accelerator pump no doubt, but didn't go as hard as the SUs.

 

I don't know what chokes/jets he's using.

i only have cut springs in the front what struts do i need to get to do the upgrade in the front of this

the rear are 8kg 200 mm free height

i have looked but so much conflicting information out there

also any recomendations on where to get my head done????

Edited July 18, 201016 yr by KE70PWR

recomendations on where to get my head done

 

If you're just going to match the ports to the manifold just do it yourself. Buy a curved cone shaped cutter and put it in an electric drill, which is what I did. Then the local head shop did a clean, skim and valves/seats.

 

If you're in for the big port flow job then you'll need a motorsport orientated head place and a fat wallet.

 

This photo is all I did. After I'd cut it I used an 80grit sanding flapper wheel from Bunnings to smooth it up. I figured it wasn't necessary to polish it dead smooth!